<?xml version="1.0" encoding="utf-8"?>
<feed xmlns="http://www.w3.org/2005/Atom">
<title>rbAmp — Projects and Tutorials</title>
<link rel="self" href="https://www.rbamp.com/projects/feed.xml"/>
<link href="https://www.rbamp.com/projects/"/>
<id>https://www.rbamp.com/projects/feed.xml</id>
<updated>2026-11-06T00:00:00Z</updated>
<author><name>rbAmp</name></author>
<subtitle>Step-by-step builds with rbAmp modules: wiring, firmware and dashboards.</subtitle>
<entry>
<id>https://www.rbamp.com/projects/arduino-energy-logger-to-an-sd-card-timestamped-csv-no-cloud</id>
<title>Arduino energy logger to an SD card: timestamped CSV, no cloud</title>
<link href="https://www.rbamp.com/projects/arduino-energy-logger-to-an-sd-card-timestamped-csv-no-cloud"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>An rbAmp module and an Arduino as a standalone logger: timestamped volts, amps, watts and kWh to a microSD card as CSV, plus serial to your PC.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/arduino-energy-monitor-with-sct-013-clamps-watts-on-an-oled-no-network</id>
<title>Arduino energy monitor with SCT-013 clamps: watts on an OLED, no network</title>
<link href="https://www.rbamp.com/projects/arduino-energy-monitor-with-sct-013-clamps-watts-on-an-oled-no-network"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>No Wi-Fi, no cloud, no Home Assistant — just an Arduino, an rbAmp module, and a small OLED showing real volts, amps, watts and kilowatt-hours. The beginner's on-ramp to the rbAmp Arduino library.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/local-current-limit-with-arduino-trip-a-relay-before-the-breaker-no-cloud</id>
<title>Local Current-Limit with Arduino — Trip a Relay Before the Breaker, No Cloud</title>
<link href="https://www.rbamp.com/projects/local-current-limit-with-arduino-trip-a-relay-before-the-breaker-no-cloud"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Read a circuit's current with an rbAmp module and trip a relay locally when it passes your limit — sub-second, with hysteresis and inrush debounce.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/raspberry-pi-energy-logging-to-csv-and-sqlite-in-python-no-cloud</id>
<title>Raspberry Pi energy logging to CSV and SQLite in Python, no cloud</title>
<link href="https://www.rbamp.com/projects/raspberry-pi-energy-logging-to-csv-and-sqlite-in-python-no-cloud"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Turn a Raspberry Pi into a standalone energy logger: timestamped volts, amps, watts and kWh to CSV or SQLite in plain Python. No RTC, no cloud.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/raspberry-pi-energy-monitor-in-python-live-watts-no-cloud</id>
<title>Raspberry Pi energy monitor in Python: live watts, no cloud</title>
<link href="https://www.rbamp.com/projects/raspberry-pi-energy-monitor-in-python-live-watts-no-cloud"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Read real mains power on a Raspberry Pi in a few lines of Python: volts, amps, watts and kWh from an rbAmp module over I²C, printed live. No cloud.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/several-circuits-from-one-raspberry-pi-a-multi-module-rbamp-bus-in-python</id>
<title>Several circuits from one Raspberry Pi: a multi-module rbAmp bus in Python</title>
<link href="https://www.rbamp.com/projects/several-circuits-from-one-raspberry-pi-a-multi-module-rbamp-bus-in-python"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Two or three rbAmp modules on a Raspberry Pi's I²C bus, latched together with one broadcast: per-circuit power and a coherent total, in plain Python.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/several-sct-013-clamps-on-one-arduino-metering-many-circuits-over-one-bus</id>
<title>Several SCT-013 clamps on one Arduino: metering many circuits over one bus</title>
<link href="https://www.rbamp.com/projects/several-sct-013-clamps-on-one-arduino-metering-many-circuits-over-one-bus"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Two or three rbAmp modules on one I²C bus behind a single Arduino: one broadcast latch, per-circuit power and a coherent whole-panel total.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/trip-a-relay-on-over-current-from-a-raspberry-pi-local-load-control-in-python</id>
<title>Trip a Relay on Over-Current from a Raspberry Pi — Local Load Control in Python</title>
<link href="https://www.rbamp.com/projects/trip-a-relay-on-over-current-from-a-raspberry-pi-local-load-control-in-python"/>
<published>2026-07-30T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Read a circuit's current on a Raspberry Pi and switch a GPIO relay when it goes over your limit — locally, in Python, no Home Assistant, no cloud. Hysteresis and inrush debounce built in.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/a-pzem-004t-alternative-for-home-assistant-migrate-to-rbamp-and-keep-all-your-history</id>
<title>PZEM-004T alternative for Home Assistant: keep your history</title>
<link href="https://www.rbamp.com/projects/a-pzem-004t-alternative-for-home-assistant-migrate-to-rbamp-and-keep-all-your-history"/>
<published>2026-07-29T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Outgrown your PZEM-004T? Swap to rbAmp over I²C without losing a single graph — same entity IDs, history intact, UART freed, room to add more circuits. A one-YAML migration.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/load-shedding-in-home-assistant-current-limits-alerts-and-relays-from-your-own-per-circuit-data</id>
<title>Load shedding in Home Assistant: per-circuit current limits</title>
<link href="https://www.rbamp.com/projects/load-shedding-in-home-assistant-current-limits-alerts-and-relays-from-your-own-per-circuit-data"/>
<published>2026-07-29T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Stop tripping the main breaker. Meter branch current in real time with an rbAmp I-module and let Home Assistant alert, cap a circuit, or shed low-priority load automatically.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/per-circuit-energy-monitoring-in-home-assistant-the-whole-panel-on-one-esp32</id>
<title>ESP32 Whole-House Energy Monitor — Real Per-Circuit Metering in Home Assistant</title>
<link href="https://www.rbamp.com/projects/per-circuit-energy-monitoring-in-home-assistant-the-whole-panel-on-one-esp32"/>
<published>2026-07-29T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Meter your whole electrical panel — mains plus every branch — from one ESP32 over a single two-wire I²C bus. Real active power and energy per circuit in the Home Assistant Energy Dashboard, no cloud.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/three-phase-energy-monitoring-in-home-assistant-3-rbamp-ui-on-one-esp32</id>
<title>Three-Phase Energy Monitoring in Home Assistant: 3× rbAmp UI on One ESP32</title>
<link href="https://www.rbamp.com/projects/three-phase-energy-monitoring-in-home-assistant-3-rbamp-ui-on-one-esp32"/>
<published>2026-07-29T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Coherent per-phase 3-phase energy monitoring in Home Assistant: three rbAmp UI modules on one ESP32 over I²C, with wiring and the full ESPHome config.</summary>
</entry>
<entry>
<id>https://www.rbamp.com/projects/per-circuit-energy-in-the-home-assistant-energy-dashboard-in-an-afternoon-with-esphome-and-rbamp</id>
<title>ESP32 Energy Monitor in Home Assistant — rbAmp in the Energy Dashboard in an Afternoon</title>
<link href="https://www.rbamp.com/projects/per-circuit-energy-in-the-home-assistant-energy-dashboard-in-an-afternoon-with-esphome-and-rbamp"/>
<published>2026-07-28T00:00:00Z</published>
<updated>2026-11-06T00:00:00Z</updated>
<summary>Add real, calibrated per-appliance energy to the Home Assistant Energy Dashboard — an ESP32, ESPHome and one rbAmp module on two I²C wires. No UART, no PZEM.</summary>
</entry>
</feed>