Administrator Three-Phase Energy Monitoring in Home Assistant: 3× rbAmp UI on One ESP32 If you've read why three single-phase meters can't measure your 3-phase power , you know the trap: three independent meters sample at different instants, so their numbers don't add up. This is the bui... energy-monitoring ESP32 esphome home-assistant I2C three-phase 29.07.2026
Administrator Real-Time Load Control with rbAmp — Current Limits, Alerts & Load Shedding in Home Assistant The problem this solves The main breaker trips when the EV charger, the water heater and the workshop all pull at once. Or you want to cap a circuit — a rental outlet, a garage socket — so it can't ex... current-monitoring ESP32 esphome home-assistant load-control load-shedding peak-shaving 29.07.2026
Administrator Migrating from PZEM-004T to rbAmp — Keep All Your Home Assistant History Why leave a PZEM that works? A PZEM-004T is a fine little meter. It keeps its own kilowatt-hour total in EEPROM, so your energy survives a reboot, and for one circuit it does the job. You outgrow it f... energy-monitoring esphome home-assistant I2C migration pzem-004t 29.07.2026
Administrator The Whole Panel on One ESP32 — Real Per-Circuit Energy in Home Assistant The problem this solves Your utility meter says the house is pulling about 3.9 kW right now. It won't tell you that the water heater is ~2.2 kW of it, the AC compressor another ~1 kW , and the rest is... ct-clamp emporia-alternative ESP32 esphome home-assistant per-circuit whole-house-energy 29.07.2026
Administrator rbAmp in the Home Assistant Energy Dashboard in 15 Minutes The problem this solves You want one honest number in Home Assistant: how much power this appliance is actually pulling, right now, and how many kilowatt-hours it burns over a month. The usual DIY ans... ct-clamp energy-monitoring ESP32 esphome home-assistant 28.07.2026
