10 · Arduino-Beispiele
Dieses Kapitel sammelt vollständige, funktionierende Arduino-Sketches für typische rbAmp-Szenarien. Alle Beispiele nutzen die Hilfsfunktionen aus initialization.md.
Diese Beispiele sprechen den rbAmp direkt über die rohe I²C-Registerschnittstelle an. Sie sind für native, eingebettete oder anderweitig ressourcenbeschränkte Integrationen gedacht, bei denen direkte Steuerung nötig ist und jedes Byte auf dem Bus zählt.
Die Erkennung eines Modul-Neustarts (Spannungseinbrüche, Watchdog) wird einmal für alle Plattformen in period-metering.md → Detecting a module restart behandelt — fügen Sie sie jedem lang laufenden Sketch unten hinzu.
Für eine bequemere, strukturierte Schnittstelle verwenden Sie die Arduino-Bibliothek rbamp (siehe Tabelle der Client-Bibliotheken in der README). Die Bibliothek kapselt die Registerdetails hinter einer High-Level-Klasse RbAmp mit benannten Methoden (readVoltage(), latchPeriod(), readPeriodSnapshot() usw.), einem automatischen Wh-Akkumulator je Kanal, der Disziplin aus Wiederholung und Plausibilitätsprüfung nach SPEC §B.5 für ESP32-Ziele und Hilfsfunktionen für Mehrmodul-Aufbauten. Die meisten Projekte sollten mit der Bibliothek beginnen und nur bei Bedarf auf die Roh-API zurückgreifen.
Inhaltsverzeichnis der Beispiele
| # | Titel | Schwierigkeit | Anzeige / Ausgabe | MQTT | DRDY | Mehrere Module | Bidirektional | Anwendungsfall |
|---|---|---|---|---|---|---|---|---|
| 1 | Schnelles Lesen | minimal | Seriell | — | — | — | — | Schnelltest |
| 2 | 60-Sekunden-Energiezähler auf OLED | niedrig | OLED | — | — | — | — | Gekapselter Wh-Zähler |
| 3 | Monitor für mehrere Module | niedrig | Seriell | — | — | ja (3) | — | Gesamthausüberwachung |
| 4 | Energiemonitor pro Gerät (UI3) | mittel | — | ja | — | — | — | Unterzählung in HA |
| 5 | Bidirektionale Bilanzierung auf dem Master bei einem BASIC-Modul | mittel | Seriell | — | ja | — | ja (Master) | Solar-Haushalt auf BASIC-Stufe |
| 6 | Gesamte Hausbilanz | hoch | — | ja | — | ja (3) | ja | Gesamte Hausbilanz |
| 7 | Erkennung von Netzereignissen | mittel | Seriell + SD | — | ja | — | — | Ereignisprotokoll der Geräte |
| 8 | MQTT-Publisher mit HA-Auto-Discovery | mittel | — | ja (+disco) | — | — | optional | Sofort einsatzbereite HA-Integration |
| 9 | Batteriebetriebener Remote-Logger mit Tiefschlaf | mittel | — | ja | — | — | — | Messung für den Außen- bzw. Inselbetrieb |
| 10 | Zeittarif (TOU) mit NTP-Wanduhr | mittel | Seriell | ja | — | — | optional | Energiemessung mit Spitzen- / Nebenzeit-Tarif |
Gemeinsamer Header für alle Beispiele
Jedes Beispiel setzt voraus, dass die folgenden Hilfsdefinitionen in der Datei enthalten sind. Um Platz zu sparen, wird der Block in den Sketches unten nicht wiederholt — gehen Sie davon aus, dass er eingebunden ist.
#include
/**
* @brief Read one byte from a register of an rbAmp slave.
* @param addr 7-bit I2C slave address.
* @param reg Register address inside the slave.
* @return Register value.
*/
uint8_t rb_read_u8(uint8_t addr, uint8_t reg) {
Wire.beginTransmission(addr);
Wire.write(reg);
// Return 0 (not 0xFF) on NACK so bit-flags like DATA_VALID/PERIOD_VALID
// are not falsely read as "valid" when the slave is unreachable.
if (Wire.endTransmission(false) != 0) return 0; // NACK on address/data
if (Wire.requestFrom(addr, (uint8_t)1) != 1) return 0;
return Wire.read();
}
/**
* @brief Read a little-endian float32 from four consecutive registers.
* @details rbAmp supports READ auto-increment (burst-read is valid). The
* per-byte form below is shown for clarity; production code may
* prefer a single burst-read for atomicity (see chapter 11).
* @param addr 7-bit I2C slave address.
* @param reg Address of the LSB of the 4-byte float.
* @return Reconstructed IEEE-754 single-precision value.
*/
float rb_read_float_le(uint8_t addr, uint8_t reg) {
uint8_t buf[4];
for (int i = 0; i < 4; i++) buf[i] = rb_read_u8(addr, reg + i);
float f;
memcpy(&f, buf, 4); // host is little-endian (AVR/ESP/ARM)
return f;
}
/**
* @brief Write a single byte to a register of an rbAmp slave.
* @param addr 7-bit I2C slave address.
* @param reg Target register address.
* @param val Byte to write.
*/
void rb_write_u8(uint8_t addr, uint8_t reg, uint8_t val) {
Wire.beginTransmission(addr);
Wire.write(reg);
Wire.write(val);
Wire.endTransmission();
}
/**
* @brief Broadcast CMD_LATCH_PERIOD to every rbAmp on the bus that has
* GC reception enabled (FLEET_CONFIG.bit0 = 1; opt-in, default OFF).
* @details Canonical 5-byte general-call frame: A5 27 group tick_lo tick_hi.
* Slaves reject any first byte != 0xA5. See chapter 11 §6.3.2.
* @param tick16 Caller's 16-bit window counter — mirrored at GC_TICK
* (0x59) for missed-frame detection.
* @param group GROUP_ID filter (0 = all-call; otherwise must match
* the module's REG_GROUP_ID = 0x28).
* @return true on ACK (at least one slave accepted the frame).
* false on bus-level NACK — no module on the bus has GC enabled
* (or no module is in the group). Caller MUST fall back to
* per-module sequential CMD_LATCH_PERIOD.
*/
bool rb_broadcast_latch(uint16_t tick16, uint8_t group = 0) {
Wire.beginTransmission(0x00); // I2C general call
Wire.write(0xA5); // frame magic
Wire.write(0x27); // CMD_LATCH_PERIOD opcode
Wire.write(group); // group_id
Wire.write((uint8_t)(tick16 & 0xFF)); // tick_lo
Wire.write((uint8_t)((tick16 >> 8) & 0xFF)); // tick_hi
return Wire.endTransmission() == 0;
}
Beispiel 1 — Schnelles Lesen (minimal)
Ziel: aktuelle U, I, P, PF jede Sekunde auf der seriellen Schnittstelle ausgeben. Hardware: ESP32 / Arduino + ein rbAmp UI1.
#define RB_ADDR 0x50
void setup() {
Serial.begin(115200);
Wire.begin();
Wire.setClock(50000);
delay(300); // let the module finish booting
// Wait until the first RT window has been computed (DATA_VALID bit 0).
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
Serial.println("rbAmp ready");
}
void loop() {
// Real-time block at 0x86..0xBD is refreshed every ~100 ms by the module (200 ms before fw v1.2).
float u = rb_read_float_le(RB_ADDR, 0x86); // RMS voltage, V
float i = rb_read_float_le(RB_ADDR, 0x8E); // RMS current, A
float p = rb_read_float_le(RB_ADDR, 0xA6); // active power, W (signed)
float pf = rb_read_float_le(RB_ADDR, 0xB2); // power factor, −1..+1 (signed)
Serial.printf("U=%.1fV I=%.3fA P=%+.1fW PF=%+.3f\n", u, i, p, pf);
delay(1000);
}
Erwartete Ausgabe:
rbAmp ready
U=230.1V I=0.262A P=+60.2W PF=+0.998
U=229.9V I=0.262A P=+60.1W PF=+0.998
...
Beispiel 2 — 60-Sekunden-Energiezähler auf OLED
Ziel: Wh-Zähler, einmal pro Minute aktualisiert, auf einem 128×64-OLED angezeigt. Hardware: ESP32 + rbAmp + SSD1306-OLED am selben I²C-Bus. Buchhaltung: unidirektional (BASIC-Stufe).
#include
#define RB_ADDR 0x50
#define OLED_W 128
#define OLED_H 64
Adafruit_SSD1306 oled(OLED_W, OLED_H, &Wire);
uint32_t t_prev_ms = 0; // wall-clock at last snapshot
double total_wh = 0; // accumulated energy, Wh
void setup() {
Serial.begin(115200);
Wire.begin();
delay(300);
oled.begin(SSD1306_SWITCHCAPVCC, 0x3C);
// Wait DATA_VALID, then issue a primer snapshot (its result is discarded).
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
rb_write_u8(RB_ADDR, 0x01, 0x27); // CMD_LATCH_PERIOD — primer
t_prev_ms = millis();
}
void loop() {
delay(60000); // 60-second period
// 1) Final snapshot — closes the period [t_prev_ms .. now].
rb_write_u8(RB_ADDR, 0x01, 0x27);
uint32_t t_now_ms = millis();
delay(50); // let firmware finalise the snapshot
// 2) Verify the snapshot is fresh before using it.
if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
Serial.println("WARN: stale snapshot");
t_prev_ms = millis();
return;
}
// 3) Read time-averaged power for channel 0 (PERIOD_AVG_P_W[0]).
float avg_p = rb_read_float_le(RB_ADDR, 0xDC);
// 4) Compute energy using the MASTER clock (authoritative).
float dt_s = (t_now_ms - t_prev_ms) / 1000.0f;
double e_wh = (double)avg_p * dt_s / 3600.0;
total_wh += e_wh;
t_prev_ms = t_now_ms;
// 5) Update the OLED.
oled.clearDisplay();
oled.setTextSize(1);
oled.setTextColor(SSD1306_WHITE);
oled.setCursor(0, 0);
oled.printf("P: %6.1f W", avg_p);
oled.setCursor(0, 16);
oled.printf("dt: %6.1f s", dt_s);
oled.setCursor(0, 32);
oled.setTextSize(2);
oled.printf("%.2f Wh", total_wh);
oled.display();
Serial.printf("avg_P=%.1f E_period=%.3f total=%.3f\n", avg_p, e_wh, total_wh);
}
Das OLED teilt sich den rbAmp-I²C-Bus (die typische OLED-Adresse ist 0x3C, keine Kollision mit 0x50).
Beispiel 3 — Überwachung mehrerer Module
Ziel: drei Module abfragen (Hauptzuleitung, Warmwasserbereiter, Klimaanlage) und die Gesamtleistung ausgeben. Hardware: ESP32 + 3 × rbAmp UI1 (Adressen 0x50, 0x51, 0x52).
const uint8_t modules[] = {0x50, 0x51, 0x52};
const char* labels[] = {"Mains ", "Boiler", "AC "};
const int N = 3;
void setup() {
Serial.begin(115200);
Wire.begin();
Wire.setClock(50000);
delay(300);
// Bus scan — confirm every module is present.
for (int i = 0; i < N; i++) {
Wire.beginTransmission(modules[i]);
if (Wire.endTransmission() != 0) {
Serial.printf("ERROR: %s at 0x%02X not found — restarting in 5 s\n",
labels[i], modules[i]);
delay(5000);
ESP.restart(); // reboot rather than hang
}
}
Serial.println("All modules OK");
}
void loop() {
float total_p = 0;
Serial.println("---");
// Read each module in turn (round-robin).
for (int i = 0; i < N; i++) {
float u = rb_read_float_le(modules[i], 0x86);
float p = rb_read_float_le(modules[i], 0xA6);
Serial.printf("[%s] U=%.1f P=%+.1f W\n", labels[i], u, p);
total_p += p;
}
Serial.printf("TOTAL: %.1f W\n", total_p);
delay(2000);
}
Beispiel 4 — Energiemonitor pro Gerät (UI3)
Ziel: ein UI3-Modul mit drei Stromzangen an drei verschiedenen einphasigen Lasten. Unabhängige Wh-Zähler pro Last. MQTT-Veröffentlichung. Hardware: ESP32 + 1 × rbAmp UI3. Buchhaltung: unidirektional.
#include
#include
#define RB_ADDR 0x50
const char* CH_NAMES[3] = {"main", "heatpump", "lights"};
WiFiClient espClient;
PubSubClient mqtt(espClient);
uint32_t t_prev_ms = 0;
double total_wh[3] = {0, 0, 0}; // per-channel accumulated energy
/**
* @brief Publish a single channel's data to MQTT.
* @param ch_name Channel name (used in the topic).
* @param avg_p Time-averaged power over the closed period, W.
* @param e_wh Accumulated channel energy, Wh.
*/
void mqtt_publish(const char* ch_name, float avg_p, double e_wh) {
char topic[64], payload[64];
snprintf(topic, sizeof(topic), "rbamp/%s/state", ch_name);
snprintf(payload, sizeof(payload),
"{\"power\":%.1f,\"energy\":%.4f}", avg_p, e_wh);
mqtt.publish(topic, payload);
}
void setup() {
Serial.begin(115200);
WiFi.begin("ssid", "password");
uint32_t wifi_start = millis();
while (WiFi.status() != WL_CONNECTED) { // bounded wait — avoid WDT
delay(500);
if (millis() - wifi_start > 30000) {
Serial.println("WiFi timeout — restarting");
ESP.restart();
}
}
mqtt.setServer("192.168.1.10", 1883);
mqtt.setKeepAlive(60); // 60 s keepalive (default 15 s)
mqtt.connect("rbamp-ui3"); // best-effort; loop() retries
Wire.begin();
delay(300);
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
rb_write_u8(RB_ADDR, 0x01, 0x27); // primer snapshot
t_prev_ms = millis();
}
void loop() {
// Service MQTT keepalive every iteration (not once per 60 s — broker would
// drop the session after the default 15 s timeout). Reconnect with bounded
// back-off when the broker is unreachable.
if (!mqtt.connected()) {
static uint32_t last_retry = 0;
if (millis() - last_retry > 5000) {
last_retry = millis();
mqtt.connect("rbamp-ui3");
}
}
mqtt.loop();
// Non-blocking 60-second period — keeps mqtt.loop alive for keepalive.
static uint32_t last_period_ms = 0;
if (last_period_ms == 0) last_period_ms = millis();
if (millis() - last_period_ms < 60000) {
delay(50);
return;
}
last_period_ms = millis();
// Snapshot + read three per-channel period averages.
rb_write_u8(RB_ADDR, 0x01, 0x27);
uint32_t t_now = millis();
delay(50);
if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
t_prev_ms = millis();
return;
}
// Per-channel PERIOD_AVG_P_W: I0 at 0xDC, I1 at 0xC2, I2 at 0xC6.
float avg_p[3];
avg_p[0] = rb_read_float_le(RB_ADDR, 0xDC); // I0
avg_p[1] = rb_read_float_le(RB_ADDR, 0xC2); // I1
avg_p[2] = rb_read_float_le(RB_ADDR, 0xC6); // I2
float dt_s = (t_now - t_prev_ms) / 1000.0f;
t_prev_ms = t_now;
for (int ch = 0; ch < 3; ch++) {
double e = (double)avg_p[ch] * dt_s / 3600.0;
total_wh[ch] += e;
Serial.printf("[%s] avg_P=%+.1f W E_total=%.3f Wh\n",
CH_NAMES[ch], avg_p[ch], total_wh[ch]);
mqtt_publish(CH_NAMES[ch], avg_p[ch], total_wh[ch]);
}
}
Beispiel 5 — Bidirektionale Buchhaltung auf dem Master für ein BASIC-Modul
Ziel: bidirektionale Buchhaltung auf dem Master implementieren, wenn die Stufe des Moduls BASIC ist (der Periodenakkumulator begrenzt negative Abtastwerte). Der Master liest RT P_real in jedem Messfenster (~100 ms, v1.2 und neuer) und trennt Verbrauch und Einspeisung selbst. Hardware: ESP32 + rbAmp UI1 an einer Last mit Solarwechselrichter. Anwendbarkeit: für BASIC-Besitzer, die Einspeisung sichtbar machen müssen. Funktioniert heute auf BASIC-Modulen.
#define RB_ADDR 0x50
const int PIN_DRDY = 15;
volatile bool data_ready = false; // set by DRDY ISR
double e_consumed_wh = 0;
double e_exported_wh = 0;
uint32_t t_last_sample_ms = 0;
/**
* @brief Interrupt service routine for DRDY falling edge.
* @details Marks fresh data available. Kept tiny (no I2C calls inside ISR).
*/
void IRAM_ATTR on_drdy() { data_ready = true; }
void setup() {
Serial.begin(115200);
Wire.begin();
pinMode(PIN_DRDY, INPUT_PULLUP);
delay(300);
// Wait for the slave to come online BEFORE arming the ISR — otherwise a
// settling pull-up edge can fire a spurious interrupt against a not-yet-
// initialised slave and set data_ready before the first valid window.
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
t_last_sample_ms = millis();
attachInterrupt(digitalPinToInterrupt(PIN_DRDY), on_drdy, FALLING);
Serial.println("Bidirectional accumulator started");
}
void loop() {
if (!data_ready) return; // sleep until next RT window
data_ready = false;
uint32_t t_now = millis();
// Signed instantaneous P_real: positive = consume, negative = export.
float p = rb_read_float_le(RB_ADDR, 0xA6);
float dt_s = (t_now - t_last_sample_ms) / 1000.0f;
t_last_sample_ms = t_now;
// Split into two accumulators on the master side.
if (p > 0) {
e_consumed_wh += p * dt_s / 3600.0;
} else {
e_exported_wh += (-p) * dt_s / 3600.0;
}
// Print summary every 5 seconds (not on every RT window).
static uint32_t last_print = 0;
if (t_now - last_print >= 5000) {
last_print = t_now;
Serial.printf("P=%+8.1fW consumed=%.4f Wh exported=%.4f Wh net=%+.4f Wh\n",
p, e_consumed_wh, e_exported_wh,
e_consumed_wh - e_exported_wh);
}
}
Notes:
- DRDY synchronisiert Lesevorgänge mit jedem RT-Fenster (~100 ms, v1.2 und neuer).
- Die Genauigkeit hängt von der Stabilität des DRDY-Intervalls ab (typisch ±1 ms).
- Ein kleiner Fehler summiert sich nahe den Nulldurchgängen von P, ist aber bei Haushaltslasten vernachlässigbar.
Beispiel 6 — Energiebilanz des Hauses
Ziel: vollständiges Bilanz-Dashboard. Drei Module:
- rbAmp #1 am Hauptzähler (Netz): bidirektional — misst Netzbezug und Einspeisung.
- rbAmp #2 am Ausgang des Solarwechselrichters (Solar): misst die Erzeugung.
- rbAmp #3 UI3 an drei großen Lasten (Wärmepumpe, Klimaanlage, Ladestation für E-Autos).
Der Master berechnet: total_consumed = solar_self_used + grid_consumed, solar_generated = solar_self_used + grid_exported.
Hardware: ESP32 + 3 × rbAmp + Wi-Fi + MQTT. Stufen: STD-Produktstufe für das Netzmodul (bidirektional). Solar- und Lastmodule können BASIC sein (konstruktionsbedingt unidirektional).
#include
#include
const uint8_t ADDR_MAINS = 0x50; // bidirectional (STD)
const uint8_t ADDR_SOLAR = 0x51; // generation only (BASIC OK)
const uint8_t ADDR_LOADS = 0x52; // UI3, big consumers
// Bidirectional mains module (STD line)? Set true and fill the
// PERIOD_AVG_P_NEG address from the SKU datasheet. Keep false on BASIC.
const bool HAS_NEG_REG_MAINS = false;
#define REG_PERIOD_AVG_P_NEG_MAINS 0x00
WiFiClient espClient;
PubSubClient mqtt(espClient);
uint32_t t_prev_ms = 0;
/** Accumulated energy in Wh, per category. */
struct {
double mains_in_wh = 0; // grid consumed
double mains_out_wh = 0; // grid exported
double solar_total_wh = 0; // solar generated
double loads_wh[3] = {0, 0, 0}; // per-appliance
} totals;
void setup() {
Serial.begin(115200);
WiFi.begin("ssid", "password");
while (WiFi.status() != WL_CONNECTED) delay(500);
mqtt.setServer("192.168.1.10", 1883);
mqtt.connect("home-balance");
Wire.begin();
Wire.setClock(50000);
delay(300);
// Wait until all three modules report DATA_VALID.
for (uint8_t addr : {ADDR_MAINS, ADDR_SOLAR, ADDR_LOADS}) {
while ((rb_read_u8(addr, 0xCE) & 0x01) == 0) delay(50);
}
static uint16_t gc_tick = 0;
if (!rb_broadcast_latch(gc_tick++)) {
// GC NACK — no module has GC enabled. Fall back to per-module snapshot.
for (uint8_t addr : {ADDR_MAINS, ADDR_SOLAR, ADDR_LOADS}) {
rb_write_u8(addr, 0x01, 0x27);
}
}
t_prev_ms = millis();
Serial.println("Home balance started");
}
void loop() {
delay(60000);
// Synchronous snapshot — all three modules snapshot at the same instant.
static uint16_t gc_tick = 1;
if (!rb_broadcast_latch(gc_tick++)) {
// GC NACK — fall back to per-module sequential snapshot (skew ~1 ms/module).
for (uint8_t addr : {ADDR_MAINS, ADDR_SOLAR, ADDR_LOADS}) {
rb_write_u8(addr, 0x01, 0x27);
}
}
uint32_t t_now = millis();
delay(50);
float dt_s = (t_now - t_prev_ms) / 1000.0f;
t_prev_ms = t_now;
// ----- MAINS (bidirectional, STD line) -----
if (rb_read_u8(ADDR_MAINS, 0x07) & 0x01) {
float avg_p_consume = rb_read_float_le(ADDR_MAINS, 0xDC);
float avg_p_export = HAS_NEG_REG_MAINS
? rb_read_float_le(ADDR_MAINS, REG_PERIOD_AVG_P_NEG_MAINS)
: 0.0f;
totals.mains_in_wh += avg_p_consume * dt_s / 3600.0;
totals.mains_out_wh += avg_p_export * dt_s / 3600.0;
}
// ----- SOLAR (generation only) -----
// The CT arrow points toward the home; P > 0 = inverter exporting.
if (rb_read_u8(ADDR_SOLAR, 0x07) & 0x01) {
float avg_p = rb_read_float_le(ADDR_SOLAR, 0xDC);
totals.solar_total_wh += avg_p * dt_s / 3600.0;
}
// ----- LOADS (UI3, three channels) -----
if (rb_read_u8(ADDR_LOADS, 0x07) & 0x01) {
float p[3];
p[0] = rb_read_float_le(ADDR_LOADS, 0xDC); // I0 channel
p[1] = rb_read_float_le(ADDR_LOADS, 0xC2); // I1 channel
p[2] = rb_read_float_le(ADDR_LOADS, 0xC6); // I2 channel
for (int i = 0; i < 3; i++) totals.loads_wh[i] += p[i] * dt_s / 3600.0;
}
// Derived balance figures.
double total_consumed = totals.mains_in_wh + totals.solar_total_wh
- totals.mains_out_wh;
double solar_self_used = totals.solar_total_wh - totals.mains_out_wh;
if (solar_self_used < 0) solar_self_used = 0; // clamp measurement noise
Serial.printf("MAINS in=%.2f out=%.2f\n", totals.mains_in_wh, totals.mains_out_wh);
Serial.printf("SOLAR gen=%.2f self-used=%.2f exported=%.2f\n",
totals.solar_total_wh, solar_self_used, totals.mains_out_wh);
Serial.printf("LOADS HP=%.2f AC=%.2f EV=%.2f\n",
totals.loads_wh[0], totals.loads_wh[1], totals.loads_wh[2]);
Serial.printf("TOTAL household consumed=%.2f Wh\n", total_consumed);
// Publish the entire balance to a single MQTT topic (retained).
char payload[512];
snprintf(payload, sizeof(payload),
"{\"mains_in\":%.3f,\"mains_out\":%.3f,\"solar\":%.3f,"
"\"self_used\":%.3f,\"total_consumed\":%.3f,"
"\"hp\":%.3f,\"ac\":%.3f,\"ev\":%.3f}",
totals.mains_in_wh, totals.mains_out_wh, totals.solar_total_wh,
solar_self_used, total_consumed,
totals.loads_wh[0], totals.loads_wh[1], totals.loads_wh[2]);
mqtt.publish("home/energy/balance", payload, true);
mqtt.loop();
}
Notes:
rb_broadcast_latch(tick)sorgt dafür, dass alle drei Module im selben Moment erfassen — entscheidend für eine genaue Bilanz. Der GC-Empfang ist optional je Modul (FLEET_CONFIG.bit0, Standard AUS, siehe Kapitel 02). Wird der GC-Frame mit NACK quittiert, fällt das Beispiel auf sequenzielleCMD_LATCH_PERIOD-Aufrufe je Modul zurück (Versatz ~1 ms pro Modul bei 50 kHz).solar_self_used = solar_total − exported_to_grid— die erzeugte und lokal verbrauchte Energie.total_consumed = mains_in + solar_self_used— gesamter Hausverbrauch.
Beispiel 7 — Erkennung von Netzereignissen
Ziel: bei jedem RT-Fenster (~100 ms, v1.2 und neuer) P mit einem exponentiell gewichteten gleitenden Mittelwert (EMA) vergleichen. Signifikante Abweichungen auf einer SD-Karte protokollieren. Hardware: ESP32 + rbAmp + SD-Karte. Anwendungsfall: automatische Erkennung großer Lastereignisse (Mikrowelle, Klimaanlage, Wasserkocher), die ein- oder ausgeschaltet werden.
#include
#define RB_ADDR 0x50
const int PIN_DRDY = 15;
const int PIN_SD_CS = 5;
volatile bool data_ready = false;
float p_ema = 0; // exponential moving average
const float EMA_ALPHA = 0.05; // ~2 s time constant at 10 Hz updates
const float EVENT_THRESHOLD_W = 200.0; // ignore steps below this
File logfile;
/** @brief DRDY interrupt — only sets a flag. */
void IRAM_ATTR on_drdy() { data_ready = true; }
void setup() {
Serial.begin(115200);
Wire.begin();
pinMode(PIN_DRDY, INPUT_PULLUP);
// SD card setup with explicit failure check — opening a non-existent file
// returns a falsey File object; writing to it is undefined on some cores.
if (!SD.begin(PIN_SD_CS)) {
Serial.println("ERROR: SD.begin() failed — restarting in 5 s");
delay(5000);
ESP.restart();
}
logfile = SD.open("/events.log", FILE_APPEND);
if (!logfile) {
Serial.println("ERROR: SD.open(events.log) failed — restarting in 5 s");
delay(5000);
ESP.restart();
}
delay(300);
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
// Seed the EMA with the current power so we do not log a spurious startup event.
p_ema = rb_read_float_le(RB_ADDR, 0xA6);
attachInterrupt(digitalPinToInterrupt(PIN_DRDY), on_drdy, FALLING);
Serial.println("Event detector started");
}
void loop() {
if (!data_ready) return;
data_ready = false;
// Compute the deviation from the running average.
float p = rb_read_float_le(RB_ADDR, 0xA6);
float delta = p - p_ema;
p_ema = (1 - EMA_ALPHA) * p_ema + EMA_ALPHA * p;
// Log when the deviation exceeds the threshold.
if (fabsf(delta) > EVENT_THRESHOLD_W) { // fabsf for float (avoids double promotion)
const char* type = (delta > 0) ? "TURN_ON" : "TURN_OFF";
char line[128];
snprintf(line, sizeof(line),
"%lu %s delta=%+.1f W P=%.1f W EMA=%.1f W\n",
millis(), type, delta, p, p_ema);
Serial.print(line);
logfile.print(line);
logfile.flush(); // ensure the line hits the card
}
}
Notes:
- Der EMA passt sich der Grundlast in ~4 s an — langsame Drifts löst er nicht aus.
- Eine Schwelle von 200 W überspringt Kleinverbraucher (Licht, Handy-Ladegeräte) und erfasst große Geräte.
- DRDY sorgt für präzise Synchronisation mit jeder Aktualisierung von P_real.
Beispiel 8 — MQTT-Publisher mit Home-Assistant-Auto-Discovery
Ziel: eine sofort einsatzbereite HA-Integration. Der ESP32 verbindet sich mit Wi-Fi und einem MQTT-Broker, veröffentlicht HA-Auto-Discovery-Konfigurationen (damit die Entitäten ohne YAML in HA erscheinen) und sendet jede Minute einen JSON-Status. In HA sind keine YAML-Änderungen nötig. Hardware: ESP32 + ein rbAmp UI1 + Wi-Fi-Netz mit MQTT-Broker (Mosquitto, EMQX, HA-Mosquitto-Add-on usw.). Bilanzierung: unidirektional. Ersetzen Sie die Periodenregister für STD-Module durch die bidirektionalen.
#include
#include
#define RB_ADDR 0x50
const char* WIFI_SSID = "ssid";
const char* WIFI_PASS = "password";
const char* MQTT_HOST = "192.168.1.10";
const uint16_t MQTT_PORT = 1883;
const char* MQTT_USER = "ha"; // optional, NULL to disable
const char* MQTT_PASS = "secret";
// Stable identifiers — the HA discovery topic must be unique per entity.
const char* DEVICE_ID = "rbamp_main";
const char* DEVICE_NAME = "Mains rbAmp";
WiFiClient espClient;
PubSubClient mqtt(espClient);
uint32_t t_prev_ms = 0;
double total_wh = 0; // accumulated energy
/**
* @brief Publish a single HA discovery config for one sensor.
* @param key Short key used in topic and value_template.
* @param friendly Friendly name shown in HA.
* @param unit Unit of measurement (e.g. "V", "W", "Wh"). NULL = none.
* @param device_class HA device_class string (e.g. "voltage"). NULL = none.
* @param state_class HA state_class ("measurement" / "total_increasing").
* @details The config topic is retained, so HA discovers the entity even
* after a restart without waiting for the next state publish.
*/
void publish_discovery_sensor(const char* key,
const char* friendly,
const char* unit,
const char* device_class,
const char* state_class) {
char topic[128];
char payload[512];
snprintf(topic, sizeof(topic),
"homeassistant/sensor/%s/%s/config", DEVICE_ID, key);
// Build the discovery JSON. The shared "device" block ties all entities
// to one device card in HA.
int n = snprintf(payload, sizeof(payload),
"{"
"\"name\":\"%s %s\","
"\"unique_id\":\"%s_%s\","
"\"state_topic\":\"rbamp/%s/state\","
"\"value_template\":\"{{ value_json.%s }}\","
"\"state_class\":\"%s\","
"\"device\":{"
"\"identifiers\":[\"%s\"],"
"\"name\":\"%s\","
"\"manufacturer\":\"rbAmp\","
"\"model\":\"rbAmp UI*\""
"}",
DEVICE_NAME, friendly,
DEVICE_ID, key,
DEVICE_ID,
key,
state_class,
DEVICE_ID, DEVICE_NAME);
// Append optional fields.
if (unit && n < (int)sizeof(payload)) {
n += snprintf(payload + n, sizeof(payload) - n,
",\"unit_of_measurement\":\"%s\"", unit);
}
if (device_class && n < (int)sizeof(payload)) {
n += snprintf(payload + n, sizeof(payload) - n,
",\"device_class\":\"%s\"", device_class);
}
if (n < (int)sizeof(payload) - 1) { // guard against overflow underflow
snprintf(payload + n, sizeof(payload) - n, "}");
} else {
payload[sizeof(payload) - 2] = '}'; // forced close on truncation
payload[sizeof(payload) - 1] = '\0';
Serial.println("WARN: HA discovery payload truncated");
}
mqtt.publish(topic, payload, true); // retained — survives broker restart
}
/**
* @brief Publish the full HA Auto-discovery set for one rbAmp module.
* @details Call once on every (re)connect to the broker.
*/
void publish_discovery_all() {
publish_discovery_sensor("voltage", "Voltage", "V", "voltage", "measurement");
publish_discovery_sensor("current", "Current", "A", "current", "measurement");
publish_discovery_sensor("power", "Power", "W", "power", "measurement");
publish_discovery_sensor("energy", "Energy", "Wh", "energy", "total_increasing");
publish_discovery_sensor("frequency", "Frequency", "Hz", "frequency", "measurement");
publish_discovery_sensor("power_factor", "Power Factor", NULL, "power_factor", "measurement");
publish_discovery_sensor("apparent_power", "Apparent Power", "VA", "apparent_power", "measurement");
publish_discovery_sensor("reactive_power", "Reactive Power", "var", "reactive_power", "measurement");
}
/**
* @brief Try to (re)connect to the MQTT broker once.
* @return true on success, false otherwise. Caller is responsible for retry
* pacing — this function NEVER blocks longer than the underlying
* PubSubClient.connect() timeout.
* @details Republishes discovery configs on every successful reconnect.
* Replaces the previous unbounded `while (!connected) delay(2000)`
* loop which would trip the ESP32 task watchdog after ~5 s of broker
* unavailability.
*/
bool mqtt_try_connect() {
if (mqtt.connected()) return true;
Serial.print("MQTT connecting... ");
bool ok = MQTT_USER
? mqtt.connect(DEVICE_ID, MQTT_USER, MQTT_PASS)
: mqtt.connect(DEVICE_ID);
if (ok) {
Serial.println("OK");
publish_discovery_all();
} else {
Serial.printf("failed rc=%d (will retry)\n", mqtt.state());
}
return ok;
}
void setup() {
Serial.begin(115200);
// 1) WiFi — bounded wait, restart on persistent failure (avoids WDT).
WiFi.begin(WIFI_SSID, WIFI_PASS);
uint32_t wifi_start = millis();
while (WiFi.status() != WL_CONNECTED) {
delay(500);
if (millis() - wifi_start > 30000) {
Serial.println("WiFi timeout — restarting");
ESP.restart();
}
}
Serial.printf("WiFi up, IP=%s\n", WiFi.localIP().toString().c_str());
// 2) MQTT.
mqtt.setServer(MQTT_HOST, MQTT_PORT);
mqtt.setKeepAlive(60); // 60 s keepalive (default 15 s)
mqtt.setBufferSize(1024); // big enough for one discovery payload
// 3) rbAmp.
Wire.begin();
Wire.setClock(50000);
delay(300);
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
rb_write_u8(RB_ADDR, 0x01, 0x27); // primer snapshot
t_prev_ms = millis();
// 4) First MQTT attempt — failure is non-fatal, loop() will retry.
mqtt_try_connect();
}
void loop() {
// Keep the broker session alive: service mqtt.loop() every iteration and
// attempt reconnect with bounded back-off (no blocking 2s delay).
if (!mqtt.connected()) {
static uint32_t last_retry = 0;
if (millis() - last_retry > 5000) { // retry at most every 5 s
last_retry = millis();
mqtt_try_connect();
}
}
mqtt.loop();
static uint32_t last_period = 0;
if (last_period == 0) last_period = millis(); // seed on first iteration
if (millis() - last_period < 60000) {
delay(50); // short slice — keeps loop responsive
return;
}
last_period = millis();
// ----- Snapshot + read period snapshot -----
rb_write_u8(RB_ADDR, 0x01, 0x27);
uint32_t t_now = millis();
delay(50);
if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
Serial.println("WARN: stale snapshot, skipping publish");
t_prev_ms = millis();
return;
}
float avg_p = rb_read_float_le(RB_ADDR, 0xDC);
float dt_s = (t_now - t_prev_ms) / 1000.0f;
total_wh += (double)avg_p * dt_s / 3600.0;
t_prev_ms = t_now;
// ----- Read live RT values -----
float u = rb_read_float_le(RB_ADDR, 0x86);
float i = rb_read_float_le(RB_ADDR, 0x8E);
float pf = rb_read_float_le(RB_ADDR, 0xB2);
float q = rb_read_float_le(RB_ADDR, 0xD0);
uint8_t freq = rb_read_u8(RB_ADDR, 0x20);
// ----- Compose the state JSON -----
char payload[384];
snprintf(payload, sizeof(payload),
"{"
"\"voltage\":%.1f,"
"\"current\":%.3f,"
"\"power\":%.1f,"
"\"energy\":%.3f,"
"\"frequency\":%u,"
"\"power_factor\":%.3f,"
"\"apparent_power\":%.1f,"
"\"reactive_power\":%.1f"
"}",
u, i, avg_p, total_wh,
(unsigned)freq, pf, u * i, q);
// Topic shape matches the value_template of every discovery config.
char topic[64];
snprintf(topic, sizeof(topic), "rbamp/%s/state", DEVICE_ID);
mqtt.publish(topic, payload, false); // state is fresh each period, not retained
Serial.printf("Published: %s\n", payload);
}
Ergebnis in Home Assistant:
- Innerhalb weniger Sekunden nach der ersten Veröffentlichung legt HA automatisch ein Gerät namens
Mains rbAmpmit 8 Entitäten an (Spannung, Strom, Leistung, Energie, Frequenz, Leistungsfaktor, Scheinleistung, Blindleistung). - Die Entität
Energyhatstate_class: total_increasingund die passendedevice_class, sodass das Energie-Dashboard von HA sie als Verbrauchsquelle übernimmt. - Um die Entität aus HA zu entfernen, veröffentlichen Sie eine leere Nutzlast (retained) auf dem Topic
homeassistant/sensor/.../config.
Extending:
- Für Mehrkanal-UI2/UI3 wiederholen Sie den Discovery-Block mit nummerierten Schlüsseln (
current_1,power_1,energy_1, …) und ergänzen diese Felder im Status-JSON. - Für bidirektionale STD-Module fügen Sie
energy_exportedmitdevice_class: energyundstate_class: total_increasinghinzu.
Beispiel 9 — Batteriebetriebener Remote-Logger mit Tiefschlaf
Ziel: ein Energie-Logger für den Außen- bzw. Inselbetrieb, der alle 10 Minuten aufwacht, einen Zeitraum erfasst, die Daten veröffentlicht und wieder in den Tiefschlaf geht. Die durchschnittliche Stromaufnahme liegt bei wenigen mA, sodass eine einzelne Li-Ion-Zelle viele Monate hält. Hardware: ESP32 (oder ESP32-S3) + ein rbAmp UI1 + ein kleiner Li-Ion-Akku + Wi-Fi. Der rbAmp wird zusätzlich über einen LDO mit geringem Ruhestrom versorgt, sodass seine ~15 mA nur während der Wachphase anfallen. Bilanzierung: unidirektional. Der Energiezählerstand bleibt über die Tiefschlafzyklen hinweg im langsamen RTC-Speicher erhalten.
#include
#include
#include "esp_sleep.h"
#define RB_ADDR 0x50
const char* WIFI_SSID = "ssid";
const char* WIFI_PASS = "password";
const char* MQTT_HOST = "192.168.1.10";
// Wake every 10 minutes (600 s). The interval is the master_dt for Wh.
const uint64_t SLEEP_US = 10ULL * 60ULL * 1000000ULL;
// Power for rbAmp can be gated through a MOSFET driven by a GPIO,
// or simply left always-on if the LDO quiescent is acceptable.
const int PIN_RBAMP_POWER = 4;
// Values that must survive deep sleep are placed in RTC slow memory.
// IMPORTANT: ESP32 RTC slow memory is NOT zeroed on power-on after a brown-out
// or PSU dropout — it may hold garbage that looks like valid state. Gate every
// retained variable through a magic-marker check on cold boot.
RTC_DATA_ATTR uint32_t rtc_magic = 0; // 0xCAFEFEED when state initialised
RTC_DATA_ATTR double rtc_total_wh = 0;
RTC_DATA_ATTR uint32_t rtc_wake_count = 0;
RTC_DATA_ATTR bool rtc_primer_done = false;
RTC_DATA_ATTR uint64_t rtc_t_prev_us = 0; // boot-time wall-clock anchor
#define RTC_MAGIC 0xCAFEFEEDu
WiFiClient espClient;
PubSubClient mqtt(espClient);
/**
* @brief Power rbAmp on/off via a GPIO-driven high-side switch.
* @param on true = enable, false = disable.
* @details If your hardware always-powers rbAmp, you can remove this function
* and skip the calls to it.
*/
void rbamp_power(bool on) {
pinMode(PIN_RBAMP_POWER, OUTPUT);
digitalWrite(PIN_RBAMP_POWER, on ? HIGH : LOW);
if (on) delay(300); // boot time
}
/**
* @brief Bring up WiFi with a hard timeout, so deep-sleep is never blocked
* forever on a missing AP.
* @param timeout_ms Maximum time to wait for an association.
* @return true on success, false on timeout.
*/
bool wifi_connect(uint32_t timeout_ms) {
WiFi.mode(WIFI_STA);
WiFi.begin(WIFI_SSID, WIFI_PASS);
uint32_t t0 = millis();
while (WiFi.status() != WL_CONNECTED) {
if (millis() - t0 > timeout_ms) return false;
delay(100);
}
return true;
}
/**
* @brief Publish one measurement to MQTT.
* @param avg_p Time-averaged power over the last interval, W.
* @param total_e Accumulated energy total, Wh.
* @param dt_s Length of the elapsed interval, seconds.
*/
void publish_measurement(float avg_p, double total_e, float dt_s) {
char payload[256];
snprintf(payload, sizeof(payload),
"{\"wake\":%lu,\"dt_s\":%.1f,\"avg_p\":%.1f,\"energy_wh\":%.3f}",
(unsigned long)rtc_wake_count, dt_s, avg_p, total_e);
mqtt.publish("rbamp/remote/state", payload, true);
mqtt.loop();
Serial.printf("Published: %s\n", payload);
}
void setup() {
Serial.begin(115200);
// --- Cold-boot detection ---
// On any non-deep-sleep reset (power-on, brown-out, watchdog, ESP.restart),
// RTC slow memory may contain garbage. Initialise on first boot.
if (rtc_magic != RTC_MAGIC) {
Serial.println("Cold boot — initialising RTC state");
rtc_total_wh = 0.0;
rtc_wake_count = 0;
rtc_primer_done = false;
rtc_t_prev_us = 0;
rtc_magic = RTC_MAGIC;
}
rtc_wake_count++;
// --- Power up rbAmp and bring up I2C ---
rbamp_power(true);
Wire.begin();
Wire.setClock(50000);
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
// First wake-up after a cold boot: do a primer snapshot (its result is discarded).
if (!rtc_primer_done) {
rb_write_u8(RB_ADDR, 0x01, 0x27);
rtc_t_prev_us = esp_timer_get_time();
rtc_primer_done = true;
// Go straight back to sleep — we need at least one full period to elapse
// before the next snapshot can produce a meaningful sample.
Serial.println("Primer done — sleeping until first real period");
rbamp_power(false);
esp_sleep_enable_timer_wakeup(SLEEP_US);
esp_deep_sleep_start();
}
// --- Subsequent wake-ups: read the period that just ended ---
rb_write_u8(RB_ADDR, 0x01, 0x27); // close current period
uint64_t t_now_us = esp_timer_get_time();
delay(50);
if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
Serial.println("WARN: stale snapshot — skipping this cycle");
rtc_t_prev_us = t_now_us;
rbamp_power(false);
esp_sleep_enable_timer_wakeup(SLEEP_US);
esp_deep_sleep_start();
}
float avg_p = rb_read_float_le(RB_ADDR, 0xDC);
// dt is wall-clock between snapshots; we measure it on the ESP32's RTC.
// SLEEP_US is the intent; esp_timer accounts for actual sleep + on-time.
float dt_s = (float)(t_now_us - rtc_t_prev_us) / 1000000.0f;
rtc_t_prev_us = t_now_us;
// Accumulate energy in RTC memory so it survives sleep.
rtc_total_wh += (double)avg_p * dt_s / 3600.0;
// --- Publish via WiFi/MQTT ---
if (wifi_connect(8000)) {
mqtt.setServer(MQTT_HOST, 1883);
mqtt.setBufferSize(512);
if (mqtt.connect("rbamp-remote")) {
publish_measurement(avg_p, rtc_total_wh, dt_s);
mqtt.disconnect();
}
WiFi.disconnect(true);
WiFi.mode(WIFI_OFF);
} else {
Serial.println("WiFi failed — value buffered in RTC memory, will retry next wake");
}
// --- Sleep ---
rbamp_power(false); // power-gate rbAmp
esp_sleep_enable_timer_wakeup(SLEEP_US);
Serial.println("Deep sleep");
esp_deep_sleep_start();
}
void loop() {
// setup() always ends in esp_deep_sleep_start() — loop is never reached.
}
Energiebudget (typisch, ESP32-WROOM):
- Wachdauer je Aufwachvorgang: ~3 s (Wi-Fi + MQTT + I²C).
- Wachstrom: ~80 mA im Mittel → ~0.07 mAh pro Aufwachvorgang.
- Ruhestrom: ~10 µA (RTC + Retention-Bereiche).
- Ein Aufwachvorgang alle 10 Minuten → ~10 mAh/Tag insgesamt → eine einzelne 2000-mAh-Li-Ion-Zelle hält ~6 Monate.
Notes:
rtc_total_whübersteht den Tiefschlaf überRTC_DATA_ATTR. Es geht bei vollständigem Stromausfall verloren (Batterie entfernt). Für maximale Persistenz schreiben Sie den Wert regelmäßig per MQTT oder in NVS.- Der Schritt der Primer-Erfassung ist durch
rtc_primer_donegesteuert, daher wird die erste Messung nach einem Kaltstart korrekt verworfen. wifi_connect()hat ein hartes Zeitlimit. Ist Wi-Fi nicht verfügbar, geht der Sketch wieder schlafen — die Energiesumme wird intern weiter aufsummiert und beim nächsten erfolgreichen Verbindungsaufbau veröffentlicht.
Beispiel 10 — Zeittarif (TOU) mit NTP-Wanduhr
Ziel: Energie nach einem zeitabhängigen Tarifplan abrechnen (unterschiedliche Tarife in Spitzen- und Nebenzeit). Der ESP32 führt über NTP eine echte Wanduhr, ordnet jeden abgeschlossenen Zeitraum dem richtigen Tarifbereich zu, setzt die Tagessummen um Mitternacht zurück und veröffentlicht MQTT-Nutzlasten mit ISO-Zeitstempeln. Hardware: ESP32 + ein rbAmp UI1 + Wi-Fi. Bilanzierung: unidirektional. Dieselbe Tariflogik funktioniert für STD-Leitungen — führen Sie einfach sowohl den Verbrauchs- als auch den Einspeise-Akkumulator hindurch.
#include
#include
#include
#define RB_ADDR 0x50
const char* WIFI_SSID = "ssid";
const char* WIFI_PASS = "password";
const char* MQTT_HOST = "192.168.1.10";
// NTP. Use a regional pool, then fall back to a global pool.
const char* NTP_PRIMARY = "pool.ntp.org";
const char* NTP_SECONDARY = "time.google.com";
// Local timezone in POSIX TZ format. Example: Central Europe (Berlin / Warsaw).
// CET = standard offset +1, CEST = daylight offset +2,
// M3.5.0/2 = last Sunday of March 02:00 → DST starts,
// M10.5.0/3 = last Sunday of October 03:00 → DST ends.
const char* TZ_INFO = "CET-1CEST,M3.5.0/2,M10.5.0/3";
// Time-of-use schedule: peak hours [PEAK_START_HOUR .. PEAK_END_HOUR), local time.
const int PEAK_START_HOUR = 8; // inclusive
const int PEAK_END_HOUR = 22; // exclusive
WiFiClient espClient;
PubSubClient mqtt(espClient);
uint32_t t_prev_ms = 0;
/** @brief Energy totals for the current day, split by tariff. */
struct DayTotals {
double peak_wh = 0; // Wh consumed during peak hours
double off_peak_wh = 0; // Wh consumed during off-peak hours
int day_of_year = -1; // tm_yday of the day these totals belong to
};
DayTotals today;
/** @brief Lifetime totals, never reset by the daily roll-over. */
struct LifetimeTotals {
double peak_wh = 0;
double off_peak_wh = 0;
};
LifetimeTotals lifetime;
/**
* @brief Connect to WiFi (blocking with progress dots on Serial).
*/
void wifi_connect() {
WiFi.mode(WIFI_STA);
WiFi.begin(WIFI_SSID, WIFI_PASS);
Serial.print("WiFi");
while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print('.'); }
Serial.printf(" up, IP=%s\n", WiFi.localIP().toString().c_str());
}
/**
* @brief Synchronise the system clock with NTP and apply the local timezone.
* @details Blocks until the first valid time is received (timeout 15 s).
* On timeout the function returns anyway; subsequent reads will see
* tm_year == (1970-1900) and the caller can detect this.
*/
void ntp_sync() {
configTime(0, 0, NTP_PRIMARY, NTP_SECONDARY); // raw UTC first
setenv("TZ", TZ_INFO, 1); // then apply local TZ
tzset();
Serial.print("NTP sync");
time_t now = 0;
uint32_t t0 = millis();
while (now < 1700000000 && millis() - t0 < 15000) { // sanity: ≥ year 2023
delay(500);
Serial.print('.');
time(&now);
}
struct tm tm_now;
localtime_r(&now, &tm_now);
Serial.printf(" %04d-%02d-%02d %02d:%02d:%02d %s\n",
tm_now.tm_year + 1900, tm_now.tm_mon + 1, tm_now.tm_mday,
tm_now.tm_hour, tm_now.tm_min, tm_now.tm_sec, tm_now.tm_zone);
}
/**
* @brief Decide whether a given local hour falls inside the peak tariff window.
* @param hour Hour of day, 0..23 (local time).
* @return true if peak, false if off-peak.
* @details For schedules that span midnight (e.g. peak is 22..6),
* swap the test to `(hour >= PEAK_START_HOUR || hour < PEAK_END_HOUR)`.
*/
bool is_peak_hour(int hour) {
return (hour >= PEAK_START_HOUR && hour < PEAK_END_HOUR);
}
/**
* @brief Format the current local time as ISO 8601 (with offset).
* @param out Destination buffer.
* @param out_len Buffer size.
*/
void format_iso_now(char* out, size_t out_len) {
time_t now;
time(&now);
struct tm tm_now;
localtime_r(&now, &tm_now);
strftime(out, out_len, "%Y-%m-%dT%H:%M:%S%z", &tm_now); // e.g. 2026-05-22T18:30:00+0200
}
/**
* @brief Add the snapshot energy of one period to the right tariff bucket,
* and roll the daily totals over at midnight.
* @param e_wh Energy accumulated during the period, Wh.
* @param tm_now Local time at the moment of the snapshot (NOT at period start).
*/
void accumulate_energy(double e_wh, const struct tm& tm_now) {
// Daily roll-over: when the day changes, publish yesterday's totals
// (if any) and reset.
if (today.day_of_year != tm_now.tm_yday) {
if (today.day_of_year >= 0) {
char payload[192];
snprintf(payload, sizeof(payload),
"{\"yday\":%d,\"peak_wh\":%.3f,\"off_peak_wh\":%.3f,\"total_wh\":%.3f}",
today.day_of_year,
today.peak_wh, today.off_peak_wh,
today.peak_wh + today.off_peak_wh);
mqtt.publish("rbamp/tou/day_close", payload, true);
Serial.printf("Day closed: %s\n", payload);
}
today = {}; // reset
today.day_of_year = tm_now.tm_yday;
}
// Add to the right bucket. The choice is made on the snapshot instant —
// accurate enough at 60 s periods (boundary error < 60 s/day).
if (is_peak_hour(tm_now.tm_hour)) {
today.peak_wh += e_wh;
lifetime.peak_wh += e_wh;
} else {
today.off_peak_wh += e_wh;
lifetime.off_peak_wh += e_wh;
}
}
/**
* @brief Publish one tariff-tagged state to MQTT.
* @param iso ISO 8601 timestamp of the measurement.
* @param avg_p Time-averaged power over the just-closed period, W.
* @param e_wh Energy added to the totals in this period, Wh.
* @param peak true if the current hour is a peak hour.
*/
void publish_state(const char* iso, float avg_p, double e_wh, bool peak) {
char payload[384];
snprintf(payload, sizeof(payload),
"{"
"\"ts\":\"%s\","
"\"tariff\":\"%s\","
"\"avg_p\":%.1f,"
"\"period_wh\":%.4f,"
"\"today_peak_wh\":%.3f,"
"\"today_off_peak_wh\":%.3f,"
"\"life_peak_wh\":%.3f,"
"\"life_off_peak_wh\":%.3f"
"}",
iso, peak ? "peak" : "off_peak",
avg_p, e_wh,
today.peak_wh, today.off_peak_wh,
lifetime.peak_wh, lifetime.off_peak_wh);
mqtt.publish("rbamp/tou/state", payload, false);
Serial.printf("%s\n", payload);
}
void setup() {
Serial.begin(115200);
// 1) WiFi and NTP — get the wall clock first.
wifi_connect();
ntp_sync();
// 2) MQTT.
mqtt.setServer(MQTT_HOST, 1883);
mqtt.setKeepAlive(60); // 60 s keepalive (default 15 s)
mqtt.setBufferSize(512);
mqtt.connect("rbamp-tou"); // best-effort; loop() retries
// 3) rbAmp.
Wire.begin();
Wire.setClock(50000);
delay(300);
while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
rb_write_u8(RB_ADDR, 0x01, 0x27); // primer snapshot
t_prev_ms = millis();
Serial.printf("TOU started: peak %02d:00..%02d:00 local\n",
PEAK_START_HOUR, PEAK_END_HOUR);
}
void loop() {
// Maintain MQTT session: reconnect with bounded back-off (no blocking).
if (!mqtt.connected()) {
static uint32_t last_retry = 0;
if (millis() - last_retry > 5000) {
last_retry = millis();
mqtt.connect("rbamp-tou");
}
}
mqtt.loop();
static uint32_t last_period = 0;
if (last_period == 0) last_period = millis(); // seed on first iteration
if (millis() - last_period < 60000) {
delay(50); // short slice — keeps mqtt.loop responsive
return;
}
last_period = millis();
// ----- Snapshot + period read -----
rb_write_u8(RB_ADDR, 0x01, 0x27);
uint32_t t_now_ms = millis();
delay(50);
if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
Serial.println("WARN: stale snapshot, skipping");
t_prev_ms = millis();
return;
}
float avg_p = rb_read_float_le(RB_ADDR, 0xDC);
float dt_s = (t_now_ms - t_prev_ms) / 1000.0f;
double e_wh = (double)avg_p * dt_s / 3600.0;
t_prev_ms = t_now_ms;
// ----- Tag with current local time, choose tariff bucket -----
time_t now_s;
time(&now_s);
struct tm tm_now;
localtime_r(&now_s, &tm_now);
// Guard against a fresh boot with no NTP yet (year << 2023).
if (tm_now.tm_year + 1900 < 2023) {
Serial.println("WARN: clock not yet synced, retrying NTP");
ntp_sync();
return;
}
accumulate_energy(e_wh, tm_now);
char iso[40];
format_iso_now(iso, sizeof(iso));
publish_state(iso, avg_p, e_wh, is_peak_hour(tm_now.tm_hour));
}
Notes:
- Der Chip kennt die Wanduhr nie. Der Master hängt den Zeitstempel im Moment des Snapshots an — das ist der richtige Zeitpunkt, denn dann ist das Messfenster geschlossen.
localtime_r()wendet die POSIX-Regel fürTZautomatisch an, sodass Sommer- und Winterzeitwechsel ohne zusätzlichen Code korrekt behandelt werden.- Grenzfehler: Ein 60-s-Zeitraum, der die 22:00-Grenze überschreitet, wird vollständig der Nebenzeit zugeordnet (der Zeitstempel liegt beim Erfassungszeitpunkt, nach 22:00). Bei 60-Sekunden-Zeiträumen sind das höchstens ~30 s Fehlzuordnung pro Tag — für die Abrechnung eines Haushaltstarifs vernachlässigbar. Bei 15-Minuten-Zeiträumen richten Sie die Erfassung am Fahrplan-Grenzwert aus oder teilen den Zeitraum auf beide Tarifbereiche auf.
- Für bidirektionale STD-Messung führen Sie auf der Einspeiseseite einen zweiten Aufruf
accumulate_energy()aus und veröffentlichen Sie sowohl Spitzen- als auch Nebenzeit-Verbrauch sowie Spitzen- als auch Nebenzeit-Einspeisung. - Der tägliche Übergang veröffentlicht um Mitternacht eine retained-Nutzlast
rbamp/tou/day_close; Home Assistant oder eine Grafana-Datenquelle kann sie abonnieren, um die Tagessummen zu erfassen.
Beispiel-MQTT-Statuspayload:
{
"ts": "2026-05-22T18:30:00+0200",
"tariff": "peak",
"avg_p": 850.5,
"period_wh": 14.175,
"today_peak_wh": 4253.7,
"today_off_peak_wh": 1820.4,
"life_peak_wh": 285431.2,
"life_off_peak_wh": 178654.9
}
Beispiel-Payload des täglichen Tageswechsels (rbamp/tou/day_close):
{"yday":141,"peak_wh":4253.7,"off_peak_wh":1820.4,"total_wh":6074.1}
Vergleich der Beispiele
| # | Komplexität | Anzeige | MQTT | DRDY | Mehrere Module | Bidirektional | Persistenz | Anwendungsfall |
|---|---|---|---|---|---|---|---|---|
| 1 | minimal | Seriell | — | — | — | — | — | Rauchtest |
| 2 | niedrig | OLED | — | — | — | — | RAM | Zählerkasten |
| 3 | niedrig | Seriell | — | — | ja (3) | — | — | Heimüberwachung |
| 4 | mittel | — | ja | — | — | — | RAM | pro Gerät in HA |
| 5 | mittel | Seriell | — | ja | — | ja (masterseitig) | RAM | Solar-Haushalt auf BASIC-Stufe |
| 6 | hoch | — | ja | — | ja (3) | ja | RAM | gesamte Hausbilanz |
| 7 | mittel | Seriell + SD | — | ja | — | — | SD-Karte | Ereigniserkennung |
| 8 | mittel | — | ja (+disco) | — | — | optional | RAM + MQTT | HA-Auto-Discovery-Integration |
| 9 | mittel | — | ja | — | — | — | RTC-Speicher | Logger für den Außen- bzw. Inselbetrieb |
| 10 | mittel | Seriell | ja | — | — | optional | RAM + MQTT (Tagesabschluss) | TOU-Messung Spitzen-/Nebenzeit mit NTP-Wanduhr |
Bewährte Verfahren
- Prüfen Sie nach dem Start immer
DATA_VALIDund nachCMD_LATCH_PERIODPERIOD_VALID. - Verwenden Sie
delay(50)nach einem Snapshot, bevor Sie den Snapshot lesen. - Die Master-Uhr ist maßgeblich für Wh — verwenden Sie nicht
PERIOD_LATCH_MSvom Chip. - DRDY hilft bei hohen Abfrageraten (≥ 5 Hz); gewöhnliche Abfrage reicht bei niedrigen Raten (≤ 1 Hz).
- Für Mehrmodul-Aufbauten liefert ein Broadcast-Snapshot über General Call präzise Synchronisation (Firmware 1.0+).
- Masterseitige Persistenz ist für die Langzeitbilanz zwingend — rbAmp speichert keine Wh, nur das aktuelle
avg_P. - Wenn Sie einen rbAmp in einem laufenden System austauschen, sichern Sie die aufgelaufene
total_whauf dem Master vor dem Tausch und stellen Sie sie danach wieder her — das neue Modul beginnt seine Zähler bei null.
Wie geht es weiter
Wenn Sie mit diesen zehn Beispielen vertraut sind, bauen Sie den Integrationscode für Ihre Zielplattform. Vorgefertigte Bibliotheken:
- Arduino → Klasse
RbAmp(siehe Tabelle der Client-Bibliotheken in der README) - ESPHome → externe Komponente (ausführliche Darstellung unter
tools/esphome-rbamp/docs/en/) - MicroPython → Paket
rbamp(siehe Tabelle der Client-Bibliotheken in der README) - ESP-IDF → Komponente
rbamp(siehe Tabelle der Client-Bibliotheken in der README) - Linux-SBC (CPython) → Paket
rbamp(siehe Tabelle der Client-Bibliotheken in der README) - Tasmota → Berry-Treiber — zurückgestellt (keine Bibliothek ausgeliefert)
Falls Ihre Plattform nicht abgedeckt ist, dienen die Arduino-Beispiele hier als Vorlage: Portieren Sie die Hilfsfunktionen rb_read_* auf die I²C-API Ihrer Plattform; die übrige Logik bleibt gleich.