rbAmp
FR
Boutique
Docs
Mis à jour le

10 · Exemples Arduino

Ce chapitre rassemble des esquisses Arduino complètes et fonctionnelles pour les scénarios rbAmp typiques. Tous les exemples s'appuient sur les fonctions utilitaires présentées dans initialization.md.

Remarque

Ces exemples parlent directement à rbAmp via l'API I²C de registres bruts. Ils sont destinés aux intégrations natives, embarquées ou autrement contraintes en ressources, où le contrôle direct est requis et où chaque octet du bus compte.

La détection de redémarrage du module (chutes de tension, watchdog) est traitée une seule fois pour toutes les plateformes dans period-metering.md → Détection d'un redémarrage du module — ajoutez-la à tout croquis de longue durée ci-dessous.

Pour une interface plus pratique et structurée — utilisez la bibliothèque Arduino rbamp (voir le tableau des bibliothèques clientes du README). La bibliothèque enveloppe les détails au niveau des registres derrière une classe RbAmp de haut niveau aux méthodes nommées (readVoltage(), latchPeriod(), readPeriodSnapshot(), etc.), un accumulateur Wh automatique par canal, la discipline de réessai + contrôle de cohérence SPEC §B.5 pour les cibles ESP32, et des fonctions utilitaires multi-modules. La plupart des projets orientés utilisateur devraient partir de la bibliothèque et ne revenir à l'API brute que si nécessaire.

Table des matières des exemples

# Titre Difficulté Affichage / sortie MQTT DRDY Multi-modules Bidirectionnel Cas d'usage
1 Lecture rapide minimal Série — — — — Test de fonctionnement
2 Compteur d'énergie sur 60 secondes sur OLED faible OLED — — — — Compteur Wh encapsulé
3 Surveillance multi-modules faible Série — — oui (3) — Surveillance de tout le foyer
4 Suivi d'énergie par appareil (UI3) moyen — oui — — — Sous-comptage dans HA
5 Comptabilité bidirectionnelle côté maître sur un module BASIC moyen Série — oui — oui (maître) Maison solaire en gamme BASIC
6 Bilan énergétique de la maison élevé — oui — oui (3) oui Bilan complet de la maison
7 Détection d'événements de puissance moyen Série + SD — oui — — Journal des événements des appareils
8 Publication MQTT avec découverte automatique HA moyen — oui (+disco) — — facultatif Intégration HA prête à l'emploi
9 Enregistreur distant sur batterie avec veille profonde moyen — oui — — — Compteur hors réseau / extérieur
10 Tarif heures pleines / heures creuses (TOU) avec horloge murale NTP moyen Série oui — — facultatif Mesure tarifaire heures pleines / heures creuses

En-tête commun à tous les exemples

Chaque exemple suppose que les définitions utilitaires suivantes sont présentes dans le fichier. Pour gagner de la place, le bloc n'est pas répété dans chaque esquisse ci-dessous — considérez qu'il est inclus.

C++
#include 

/**
 * @brief  Read one byte from a register of an rbAmp slave.
 * @param  addr 7-bit I2C slave address.
 * @param  reg  Register address inside the slave.
 * @return Register value.
 */
uint8_t rb_read_u8(uint8_t addr, uint8_t reg) {
  Wire.beginTransmission(addr);
  Wire.write(reg);
  // Return 0 (not 0xFF) on NACK so bit-flags like DATA_VALID/PERIOD_VALID
  // are not falsely read as "valid" when the slave is unreachable.
  if (Wire.endTransmission(false) != 0) return 0;   // NACK on address/data
  if (Wire.requestFrom(addr, (uint8_t)1) != 1) return 0;
  return Wire.read();
}

/**
 * @brief  Read a little-endian float32 from four consecutive registers.
 * @details rbAmp supports READ auto-increment (burst-read is valid). The
 *          per-byte form below is shown for clarity; production code may
 *          prefer a single burst-read for atomicity (see chapter 11).
 * @param  addr 7-bit I2C slave address.
 * @param  reg  Address of the LSB of the 4-byte float.
 * @return Reconstructed IEEE-754 single-precision value.
 */
float rb_read_float_le(uint8_t addr, uint8_t reg) {
  uint8_t buf[4];
  for (int i = 0; i < 4; i++) buf[i] = rb_read_u8(addr, reg + i);
  float f;
  memcpy(&f, buf, 4);                          // host is little-endian (AVR/ESP/ARM)
  return f;
}

/**
 * @brief  Write a single byte to a register of an rbAmp slave.
 * @param  addr 7-bit I2C slave address.
 * @param  reg  Target register address.
 * @param  val  Byte to write.
 */
void rb_write_u8(uint8_t addr, uint8_t reg, uint8_t val) {
  Wire.beginTransmission(addr);
  Wire.write(reg);
  Wire.write(val);
  Wire.endTransmission();
}

/**
 * @brief  Broadcast CMD_LATCH_PERIOD to every rbAmp on the bus that has
 *         GC reception enabled (FLEET_CONFIG.bit0 = 1; opt-in, default OFF).
 * @details Canonical 5-byte general-call frame: A5 27 group tick_lo tick_hi.
 *          Slaves reject any first byte != 0xA5. See chapter 11 §6.3.2.
 * @param  tick16  Caller's 16-bit window counter — mirrored at GC_TICK
 *                 (0x59) for missed-frame detection.
 * @param  group   GROUP_ID filter (0 = all-call; otherwise must match
 *                 the module's REG_GROUP_ID = 0x28).
 * @return true on ACK (at least one slave accepted the frame).
 *         false on bus-level NACK — no module on the bus has GC enabled
 *         (or no module is in the group). Caller MUST fall back to
 *         per-module sequential CMD_LATCH_PERIOD.
 */
bool rb_broadcast_latch(uint16_t tick16, uint8_t group = 0) {
  Wire.beginTransmission(0x00);                // I2C general call
  Wire.write(0xA5);                            // frame magic
  Wire.write(0x27);                            // CMD_LATCH_PERIOD opcode
  Wire.write(group);                           // group_id
  Wire.write((uint8_t)(tick16 & 0xFF));        // tick_lo
  Wire.write((uint8_t)((tick16 >> 8) & 0xFF)); // tick_hi
  return Wire.endTransmission() == 0;
}

Exemple 1 — Lecture rapide (minimale)

Objectif : afficher U, I, P, PF courants sur Serial chaque seconde. Matériel : ESP32 / Arduino + un rbAmp UI1.

C++
#define RB_ADDR 0x50

void setup() {
  Serial.begin(115200);
  Wire.begin();
  Wire.setClock(50000);
  delay(300);                                  // let the module finish booting

  // Wait until the first RT window has been computed (DATA_VALID bit 0).
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
  Serial.println("rbAmp ready");
}

void loop() {
  // Real-time block at 0x86..0xBD is refreshed every ~100 ms by the module (200 ms before fw v1.2).
  float u  = rb_read_float_le(RB_ADDR, 0x86);  // RMS voltage,   V
  float i  = rb_read_float_le(RB_ADDR, 0x8E);  // RMS current,   A
  float p  = rb_read_float_le(RB_ADDR, 0xA6);  // active power,  W (signed)
  float pf = rb_read_float_le(RB_ADDR, 0xB2);  // power factor,  −1..+1 (signed)

  Serial.printf("U=%.1fV  I=%.3fA  P=%+.1fW  PF=%+.3f\n", u, i, p, pf);
  delay(1000);
}

Sortie attendue :

Text
rbAmp ready
U=230.1V  I=0.262A  P=+60.2W  PF=+0.998
U=229.9V  I=0.262A  P=+60.1W  PF=+0.998
...

Exemple 2 — compteur d'énergie de 60 secondes sur OLED

Objectif : compteur Wh rafraîchi une fois par minute, affiché sur un OLED de 128×64. Matériel : ESP32 + rbAmp + OLED SSD1306 sur le même bus I²C. Comptabilité : unidirectionnelle (niveau BASIC).

C++
#include 
#define RB_ADDR 0x50
#define OLED_W 128
#define OLED_H 64
Adafruit_SSD1306 oled(OLED_W, OLED_H, &Wire);

uint32_t t_prev_ms = 0;                        // wall-clock at last snapshot
double total_wh = 0;                           // accumulated energy, Wh

void setup() {
  Serial.begin(115200);
  Wire.begin();
  delay(300);
  oled.begin(SSD1306_SWITCHCAPVCC, 0x3C);

  // Wait DATA_VALID, then issue a primer snapshot (its result is discarded).
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
  rb_write_u8(RB_ADDR, 0x01, 0x27);            // CMD_LATCH_PERIOD — primer
  t_prev_ms = millis();
}

void loop() {
  delay(60000);                                // 60-second period

  // 1) Final snapshot — closes the period [t_prev_ms .. now].
  rb_write_u8(RB_ADDR, 0x01, 0x27);
  uint32_t t_now_ms = millis();
  delay(50);                                   // let firmware finalise the snapshot

  // 2) Verify the snapshot is fresh before using it.
  if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
    Serial.println("WARN: stale snapshot");
    t_prev_ms = millis();
    return;
  }

  // 3) Read time-averaged power for channel 0 (PERIOD_AVG_P_W[0]).
  float avg_p = rb_read_float_le(RB_ADDR, 0xDC);

  // 4) Compute energy using the MASTER clock (authoritative).
  float dt_s = (t_now_ms - t_prev_ms) / 1000.0f;
  double e_wh = (double)avg_p * dt_s / 3600.0;
  total_wh += e_wh;
  t_prev_ms = t_now_ms;

  // 5) Update the OLED.
  oled.clearDisplay();
  oled.setTextSize(1);
  oled.setTextColor(SSD1306_WHITE);
  oled.setCursor(0, 0);
  oled.printf("P:  %6.1f W", avg_p);
  oled.setCursor(0, 16);
  oled.printf("dt: %6.1f s", dt_s);
  oled.setCursor(0, 32);
  oled.setTextSize(2);
  oled.printf("%.2f Wh", total_wh);
  oled.display();

  Serial.printf("avg_P=%.1f  E_period=%.3f  total=%.3f\n", avg_p, e_wh, total_wh);
}

L'OLED partage le bus I²C de rbAmp (l'adresse typique de l'OLED est 0x3C, sans collision avec 0x50).


Exemple 3 — Surveillance multi-modules

Objectif : interroger trois modules (alimentation principale, chauffe-eau, climatisation) et afficher la puissance totale. Matériel : ESP32 + 3 × rbAmp UI1 (adresses 0x50, 0x51, 0x52).

C++
const uint8_t modules[] = {0x50, 0x51, 0x52};
const char* labels[]    = {"Mains ", "Boiler", "AC    "};
const int N = 3;

void setup() {
  Serial.begin(115200);
  Wire.begin();
  Wire.setClock(50000);
  delay(300);

  // Bus scan — confirm every module is present.
  for (int i = 0; i < N; i++) {
    Wire.beginTransmission(modules[i]);
    if (Wire.endTransmission() != 0) {
      Serial.printf("ERROR: %s at 0x%02X not found — restarting in 5 s\n",
                    labels[i], modules[i]);
      delay(5000);
      ESP.restart();                           // reboot rather than hang
    }
  }
  Serial.println("All modules OK");
}

void loop() {
  float total_p = 0;
  Serial.println("---");

  // Read each module in turn (round-robin).
  for (int i = 0; i < N; i++) {
    float u = rb_read_float_le(modules[i], 0x86);
    float p = rb_read_float_le(modules[i], 0xA6);
    Serial.printf("[%s] U=%.1f  P=%+.1f W\n", labels[i], u, p);
    total_p += p;
  }
  Serial.printf("TOTAL: %.1f W\n", total_p);
  delay(2000);
}

Exemple 4 — Suivi d'énergie par appareil (UI3)

Objectif : un module UI3 avec trois pinces de courant sur trois charges monophasées différentes. Compteurs Wh indépendants par charge. Publication MQTT. Matériel : ESP32 + 1 × rbAmp UI3. Comptabilité : unidirectionnelle.

C++
#include 
#include 

#define RB_ADDR 0x50
const char* CH_NAMES[3] = {"main", "heatpump", "lights"};

WiFiClient espClient;
PubSubClient mqtt(espClient);

uint32_t t_prev_ms = 0;
double total_wh[3] = {0, 0, 0};                 // per-channel accumulated energy

/**
 * @brief  Publish a single channel's data to MQTT.
 * @param  ch_name   Channel name (used in the topic).
 * @param  avg_p     Time-averaged power over the closed period, W.
 * @param  e_wh      Accumulated channel energy, Wh.
 */
void mqtt_publish(const char* ch_name, float avg_p, double e_wh) {
  char topic[64], payload[64];
  snprintf(topic, sizeof(topic), "rbamp/%s/state", ch_name);
  snprintf(payload, sizeof(payload),
           "{\"power\":%.1f,\"energy\":%.4f}", avg_p, e_wh);
  mqtt.publish(topic, payload);
}

void setup() {
  Serial.begin(115200);
  WiFi.begin("ssid", "password");
  uint32_t wifi_start = millis();
  while (WiFi.status() != WL_CONNECTED) {        // bounded wait — avoid WDT
    delay(500);
    if (millis() - wifi_start > 30000) {
      Serial.println("WiFi timeout — restarting");
      ESP.restart();
    }
  }
  mqtt.setServer("192.168.1.10", 1883);
  mqtt.setKeepAlive(60);                         // 60 s keepalive (default 15 s)
  mqtt.connect("rbamp-ui3");                     // best-effort; loop() retries

  Wire.begin();
  delay(300);
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
  rb_write_u8(RB_ADDR, 0x01, 0x27);             // primer snapshot
  t_prev_ms = millis();
}

void loop() {
  // Service MQTT keepalive every iteration (not once per 60 s — broker would
  // drop the session after the default 15 s timeout). Reconnect with bounded
  // back-off when the broker is unreachable.
  if (!mqtt.connected()) {
    static uint32_t last_retry = 0;
    if (millis() - last_retry > 5000) {
      last_retry = millis();
      mqtt.connect("rbamp-ui3");
    }
  }
  mqtt.loop();

  // Non-blocking 60-second period — keeps mqtt.loop alive for keepalive.
  static uint32_t last_period_ms = 0;
  if (last_period_ms == 0) last_period_ms = millis();
  if (millis() - last_period_ms < 60000) {
    delay(50);
    return;
  }
  last_period_ms = millis();

  // Snapshot + read three per-channel period averages.
  rb_write_u8(RB_ADDR, 0x01, 0x27);
  uint32_t t_now = millis();
  delay(50);

  if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
    t_prev_ms = millis();
    return;
  }

  // Per-channel PERIOD_AVG_P_W: I0 at 0xDC, I1 at 0xC2, I2 at 0xC6.
  float avg_p[3];
  avg_p[0] = rb_read_float_le(RB_ADDR, 0xDC);   // I0
  avg_p[1] = rb_read_float_le(RB_ADDR, 0xC2);   // I1
  avg_p[2] = rb_read_float_le(RB_ADDR, 0xC6);   // I2

  float dt_s = (t_now - t_prev_ms) / 1000.0f;
  t_prev_ms = t_now;

  for (int ch = 0; ch < 3; ch++) {
    double e = (double)avg_p[ch] * dt_s / 3600.0;
    total_wh[ch] += e;
    Serial.printf("[%s] avg_P=%+.1f W  E_total=%.3f Wh\n",
                  CH_NAMES[ch], avg_p[ch], total_wh[ch]);
    mqtt_publish(CH_NAMES[ch], avg_p[ch], total_wh[ch]);
  }
}

Exemple 5 — Comptabilité bidirectionnelle côté maître sur un module BASIC

Objectif : mettre en œuvre la comptabilité bidirectionnelle sur le maître lorsque le niveau du module est BASIC (l'accumulateur de période ramène à zéro les échantillons négatifs). Le maître lit P_real temps réel à chaque fenêtre de mesure (~100 ms, v1.2 et ultérieure) et sépare lui-même consommation et injection. Matériel : ESP32 + rbAmp UI1 sur une charge avec onduleur solaire. Applicabilité : pour les propriétaires de BASIC qui ont besoin de visibilité sur l'injection. Fonctionne dès aujourd'hui sur les modules BASIC.

C++
#define RB_ADDR 0x50
const int PIN_DRDY = 15;

volatile bool data_ready = false;               // set by DRDY ISR
double e_consumed_wh = 0;
double e_exported_wh = 0;
uint32_t t_last_sample_ms = 0;

/**
 * @brief  Interrupt service routine for DRDY falling edge.
 * @details Marks fresh data available. Kept tiny (no I2C calls inside ISR).
 */
void IRAM_ATTR on_drdy() { data_ready = true; }

void setup() {
  Serial.begin(115200);
  Wire.begin();
  pinMode(PIN_DRDY, INPUT_PULLUP);
  delay(300);
  // Wait for the slave to come online BEFORE arming the ISR — otherwise a
  // settling pull-up edge can fire a spurious interrupt against a not-yet-
  // initialised slave and set data_ready before the first valid window.
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);
  t_last_sample_ms = millis();
  attachInterrupt(digitalPinToInterrupt(PIN_DRDY), on_drdy, FALLING);
  Serial.println("Bidirectional accumulator started");
}

void loop() {
  if (!data_ready) return;                      // sleep until next RT window
  data_ready = false;

  uint32_t t_now = millis();

  // Signed instantaneous P_real: positive = consume, negative = export.
  float p = rb_read_float_le(RB_ADDR, 0xA6);
  float dt_s = (t_now - t_last_sample_ms) / 1000.0f;
  t_last_sample_ms = t_now;

  // Split into two accumulators on the master side.
  if (p > 0) {
    e_consumed_wh += p * dt_s / 3600.0;
  } else {
    e_exported_wh += (-p) * dt_s / 3600.0;
  }

  // Print summary every 5 seconds (not on every RT window).
  static uint32_t last_print = 0;
  if (t_now - last_print >= 5000) {
    last_print = t_now;
    Serial.printf("P=%+8.1fW   consumed=%.4f Wh  exported=%.4f Wh  net=%+.4f Wh\n",
                  p, e_consumed_wh, e_exported_wh,
                  e_consumed_wh - e_exported_wh);
  }
}

Notes:

  • DRDY synchronise les lectures avec chaque fenêtre RT (~100 ms, v1.2 et ultérieures).
  • La précision dépend de la stabilité de l'intervalle DRDY (typiquement ±1 ms).
  • Une petite erreur s'accumule près des passages à zéro de P, mais elle reste négligeable pour les charges domestiques.

Exemple 6 — bilan énergétique de la maison

Objectif : tableau de bord complet du bilan. Trois modules :

  • rbAmp n° 1 sur l'arrivée principale (secteur) : bidirectionnel — mesure l'énergie soutirée et injectée sur le réseau.
  • rbAmp n° 2 sur la sortie de l'onduleur solaire (solaire) : mesure la production.
  • rbAmp n° 3 UI3 sur trois grosses charges (pompe à chaleur, climatisation, borne de recharge VE).

Le maître calcule : total_consumed = solar_self_used + grid_consumed, solar_generated = solar_self_used + grid_exported.

Matériel : ESP32 + 3 × rbAmp + WiFi + MQTT. Gammes : gamme produit STD pour le module d'alimentation principale (bidirectionnel). Les modules solaire et charges peuvent être BASIC (unidirectionnels par construction).

C++
#include 
#include 

const uint8_t ADDR_MAINS = 0x50;                // bidirectional (STD)
const uint8_t ADDR_SOLAR = 0x51;                // generation only (BASIC OK)
const uint8_t ADDR_LOADS = 0x52;                // UI3, big consumers

// Bidirectional mains module (STD line)? Set true and fill the
// PERIOD_AVG_P_NEG address from the SKU datasheet. Keep false on BASIC.
const bool HAS_NEG_REG_MAINS = false;
#define REG_PERIOD_AVG_P_NEG_MAINS 0x00

WiFiClient espClient;
PubSubClient mqtt(espClient);

uint32_t t_prev_ms = 0;

/** Accumulated energy in Wh, per category. */
struct {
  double mains_in_wh    = 0;                    // grid consumed
  double mains_out_wh   = 0;                    // grid exported
  double solar_total_wh = 0;                    // solar generated
  double loads_wh[3]    = {0, 0, 0};            // per-appliance
} totals;

void setup() {
  Serial.begin(115200);
  WiFi.begin("ssid", "password");
  while (WiFi.status() != WL_CONNECTED) delay(500);
  mqtt.setServer("192.168.1.10", 1883);
  mqtt.connect("home-balance");

  Wire.begin();
  Wire.setClock(50000);
  delay(300);

  // Wait until all three modules report DATA_VALID.
  for (uint8_t addr : {ADDR_MAINS, ADDR_SOLAR, ADDR_LOADS}) {
    while ((rb_read_u8(addr, 0xCE) & 0x01) == 0) delay(50);
  }

  static uint16_t gc_tick = 0;
  if (!rb_broadcast_latch(gc_tick++)) {
    // GC NACK — no module has GC enabled. Fall back to per-module snapshot.
    for (uint8_t addr : {ADDR_MAINS, ADDR_SOLAR, ADDR_LOADS}) {
      rb_write_u8(addr, 0x01, 0x27);
    }
  }
  t_prev_ms = millis();
  Serial.println("Home balance started");
}

void loop() {
  delay(60000);

  // Synchronous snapshot — all three modules snapshot at the same instant.
  static uint16_t gc_tick = 1;
  if (!rb_broadcast_latch(gc_tick++)) {
    // GC NACK — fall back to per-module sequential snapshot (skew ~1 ms/module).
    for (uint8_t addr : {ADDR_MAINS, ADDR_SOLAR, ADDR_LOADS}) {
      rb_write_u8(addr, 0x01, 0x27);
    }
  }
  uint32_t t_now = millis();
  delay(50);

  float dt_s = (t_now - t_prev_ms) / 1000.0f;
  t_prev_ms = t_now;

  // ----- MAINS (bidirectional, STD line) -----
  if (rb_read_u8(ADDR_MAINS, 0x07) & 0x01) {
    float avg_p_consume = rb_read_float_le(ADDR_MAINS, 0xDC);
    float avg_p_export  = HAS_NEG_REG_MAINS
        ? rb_read_float_le(ADDR_MAINS, REG_PERIOD_AVG_P_NEG_MAINS)
        : 0.0f;
    totals.mains_in_wh  += avg_p_consume * dt_s / 3600.0;
    totals.mains_out_wh += avg_p_export  * dt_s / 3600.0;
  }

  // ----- SOLAR (generation only) -----
  // The CT arrow points toward the home; P > 0 = inverter exporting.
  if (rb_read_u8(ADDR_SOLAR, 0x07) & 0x01) {
    float avg_p = rb_read_float_le(ADDR_SOLAR, 0xDC);
    totals.solar_total_wh += avg_p * dt_s / 3600.0;
  }

  // ----- LOADS (UI3, three channels) -----
  if (rb_read_u8(ADDR_LOADS, 0x07) & 0x01) {
    float p[3];
    p[0] = rb_read_float_le(ADDR_LOADS, 0xDC);  // I0 channel
    p[1] = rb_read_float_le(ADDR_LOADS, 0xC2);  // I1 channel
    p[2] = rb_read_float_le(ADDR_LOADS, 0xC6);  // I2 channel
    for (int i = 0; i < 3; i++) totals.loads_wh[i] += p[i] * dt_s / 3600.0;
  }

  // Derived balance figures.
  double total_consumed  = totals.mains_in_wh + totals.solar_total_wh
                         - totals.mains_out_wh;
  double solar_self_used = totals.solar_total_wh - totals.mains_out_wh;
  if (solar_self_used < 0) solar_self_used = 0;  // clamp measurement noise

  Serial.printf("MAINS  in=%.2f  out=%.2f\n", totals.mains_in_wh, totals.mains_out_wh);
  Serial.printf("SOLAR  gen=%.2f  self-used=%.2f  exported=%.2f\n",
                totals.solar_total_wh, solar_self_used, totals.mains_out_wh);
  Serial.printf("LOADS  HP=%.2f  AC=%.2f  EV=%.2f\n",
                totals.loads_wh[0], totals.loads_wh[1], totals.loads_wh[2]);
  Serial.printf("TOTAL  household consumed=%.2f Wh\n", total_consumed);

  // Publish the entire balance to a single MQTT topic (retained).
  char payload[512];
  snprintf(payload, sizeof(payload),
    "{\"mains_in\":%.3f,\"mains_out\":%.3f,\"solar\":%.3f,"
    "\"self_used\":%.3f,\"total_consumed\":%.3f,"
    "\"hp\":%.3f,\"ac\":%.3f,\"ev\":%.3f}",
    totals.mains_in_wh, totals.mains_out_wh, totals.solar_total_wh,
    solar_self_used, total_consumed,
    totals.loads_wh[0], totals.loads_wh[1], totals.loads_wh[2]);
  mqtt.publish("home/energy/balance", payload, true);
  mqtt.loop();
}

Notes:

  • rb_broadcast_latch(tick) garantit que les trois modules capturent au même instant — essentiel pour un bilan exact. La réception GC est sur option par module (FLEET_CONFIG.bit0, par défaut DÉSACTIVÉE, voir le chapitre 02). Si la trame GC reçoit un NACK, l'exemple revient à des CMD_LATCH_PERIOD séquentiels par module (décalage d'environ 1 ms par module à 50 kHz).
  • solar_self_used = solar_total − exported_to_grid — l'énergie produite et consommée localement.
  • total_consumed = mains_in + solar_self_used — consommation totale du foyer.

Exemple 7 — détection d'événements de puissance

Objectif : à chaque fenêtre RT (~100 ms, v1.2 et ultérieure), comparer P à une moyenne mobile exponentielle pondérée (EMA). Journaliser les écarts significatifs sur une carte SD. Matériel : ESP32 + rbAmp + carte SD. Cas d'usage : détection automatique des gros événements de charge (micro-ondes, climatisation, bouilloire) qui s'allument ou s'éteignent.

C++
#include 
#define RB_ADDR 0x50
const int PIN_DRDY  = 15;
const int PIN_SD_CS = 5;

volatile bool data_ready = false;
float p_ema = 0;                                // exponential moving average
const float EMA_ALPHA = 0.05;                   // ~2 s time constant at 10 Hz updates
const float EVENT_THRESHOLD_W = 200.0;          // ignore steps below this

File logfile;

/** @brief  DRDY interrupt — only sets a flag. */
void IRAM_ATTR on_drdy() { data_ready = true; }

void setup() {
  Serial.begin(115200);
  Wire.begin();
  pinMode(PIN_DRDY, INPUT_PULLUP);

  // SD card setup with explicit failure check — opening a non-existent file
  // returns a falsey File object; writing to it is undefined on some cores.
  if (!SD.begin(PIN_SD_CS)) {
    Serial.println("ERROR: SD.begin() failed — restarting in 5 s");
    delay(5000);
    ESP.restart();
  }
  logfile = SD.open("/events.log", FILE_APPEND);
  if (!logfile) {
    Serial.println("ERROR: SD.open(events.log) failed — restarting in 5 s");
    delay(5000);
    ESP.restart();
  }

  delay(300);
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);

  // Seed the EMA with the current power so we do not log a spurious startup event.
  p_ema = rb_read_float_le(RB_ADDR, 0xA6);
  attachInterrupt(digitalPinToInterrupt(PIN_DRDY), on_drdy, FALLING);
  Serial.println("Event detector started");
}

void loop() {
  if (!data_ready) return;
  data_ready = false;

  // Compute the deviation from the running average.
  float p = rb_read_float_le(RB_ADDR, 0xA6);
  float delta = p - p_ema;
  p_ema = (1 - EMA_ALPHA) * p_ema + EMA_ALPHA * p;

  // Log when the deviation exceeds the threshold.
  if (fabsf(delta) > EVENT_THRESHOLD_W) {       // fabsf for float (avoids double promotion)
    const char* type = (delta > 0) ? "TURN_ON" : "TURN_OFF";
    char line[128];
    snprintf(line, sizeof(line),
             "%lu  %s  delta=%+.1f W  P=%.1f W  EMA=%.1f W\n",
             millis(), type, delta, p, p_ema);
    Serial.print(line);
    logfile.print(line);
    logfile.flush();                            // ensure the line hits the card
  }
}

Notes:

  • L'EMA s'adapte à la charge de fond en environ 4 s — il ne réagit pas aux dérives lentes.
  • Un seuil de 200 W ignore les charges mineures (éclairage, chargeurs de téléphone) et détecte les gros appareils.
  • DRDY assure une synchronisation précise avec chaque mise à jour de P_real.

Exemple 8 — Publieur MQTT avec découverte automatique Home Assistant

Objectif : une intégration HA prête à l'emploi. L'ESP32 se connecte au WiFi et à un broker MQTT, publie les configurations de découverte automatique Home Assistant (les entités apparaissent dans HA sans aucun YAML) et émet un état JSON chaque minute. Aucune modification YAML de HA n'est nécessaire. Matériel : ESP32 + un rbAmp UI1 + réseau WiFi avec un broker MQTT (Mosquitto, EMQX, module complémentaire Mosquitto de HA, etc.). Comptabilité : unidirectionnelle. Remplacez les registres de période par les registres bidirectionnels pour les modules STD.

C++
#include 
#include 

#define RB_ADDR 0x50
const char* WIFI_SSID    = "ssid";
const char* WIFI_PASS    = "password";
const char* MQTT_HOST    = "192.168.1.10";
const uint16_t MQTT_PORT = 1883;
const char* MQTT_USER    = "ha";                // optional, NULL to disable
const char* MQTT_PASS    = "secret";

// Stable identifiers — the HA discovery topic must be unique per entity.
const char* DEVICE_ID    = "rbamp_main";
const char* DEVICE_NAME  = "Mains rbAmp";

WiFiClient   espClient;
PubSubClient mqtt(espClient);

uint32_t t_prev_ms = 0;
double total_wh = 0;                            // accumulated energy

/**
 * @brief  Publish a single HA discovery config for one sensor.
 * @param  key          Short key used in topic and value_template.
 * @param  friendly     Friendly name shown in HA.
 * @param  unit         Unit of measurement (e.g. "V", "W", "Wh"). NULL = none.
 * @param  device_class HA device_class string (e.g. "voltage"). NULL = none.
 * @param  state_class  HA state_class ("measurement" / "total_increasing").
 * @details The config topic is retained, so HA discovers the entity even
 *          after a restart without waiting for the next state publish.
 */
void publish_discovery_sensor(const char* key,
                              const char* friendly,
                              const char* unit,
                              const char* device_class,
                              const char* state_class) {
  char topic[128];
  char payload[512];

  snprintf(topic, sizeof(topic),
           "homeassistant/sensor/%s/%s/config", DEVICE_ID, key);

  // Build the discovery JSON. The shared "device" block ties all entities
  // to one device card in HA.
  int n = snprintf(payload, sizeof(payload),
    "{"
      "\"name\":\"%s %s\","
      "\"unique_id\":\"%s_%s\","
      "\"state_topic\":\"rbamp/%s/state\","
      "\"value_template\":\"{{ value_json.%s }}\","
      "\"state_class\":\"%s\","
      "\"device\":{"
        "\"identifiers\":[\"%s\"],"
        "\"name\":\"%s\","
        "\"manufacturer\":\"rbAmp\","
        "\"model\":\"rbAmp UI*\""
      "}",
    DEVICE_NAME, friendly,
    DEVICE_ID, key,
    DEVICE_ID,
    key,
    state_class,
    DEVICE_ID, DEVICE_NAME);

  // Append optional fields.
  if (unit && n < (int)sizeof(payload)) {
    n += snprintf(payload + n, sizeof(payload) - n,
                  ",\"unit_of_measurement\":\"%s\"", unit);
  }
  if (device_class && n < (int)sizeof(payload)) {
    n += snprintf(payload + n, sizeof(payload) - n,
                  ",\"device_class\":\"%s\"", device_class);
  }
  if (n < (int)sizeof(payload) - 1) {           // guard against overflow underflow
    snprintf(payload + n, sizeof(payload) - n, "}");
  } else {
    payload[sizeof(payload) - 2] = '}';         // forced close on truncation
    payload[sizeof(payload) - 1] = '\0';
    Serial.println("WARN: HA discovery payload truncated");
  }

  mqtt.publish(topic, payload, true);           // retained — survives broker restart
}

/**
 * @brief  Publish the full HA Auto-discovery set for one rbAmp module.
 * @details Call once on every (re)connect to the broker.
 */
void publish_discovery_all() {
  publish_discovery_sensor("voltage",      "Voltage",       "V",  "voltage",      "measurement");
  publish_discovery_sensor("current",      "Current",       "A",  "current",      "measurement");
  publish_discovery_sensor("power",        "Power",         "W",  "power",        "measurement");
  publish_discovery_sensor("energy",       "Energy",        "Wh", "energy",       "total_increasing");
  publish_discovery_sensor("frequency",    "Frequency",     "Hz", "frequency",    "measurement");
  publish_discovery_sensor("power_factor", "Power Factor",  NULL, "power_factor", "measurement");
  publish_discovery_sensor("apparent_power", "Apparent Power", "VA",  "apparent_power", "measurement");
  publish_discovery_sensor("reactive_power", "Reactive Power", "var", "reactive_power", "measurement");
}

/**
 * @brief  Try to (re)connect to the MQTT broker once.
 * @return true on success, false otherwise. Caller is responsible for retry
 *         pacing — this function NEVER blocks longer than the underlying
 *         PubSubClient.connect() timeout.
 * @details Republishes discovery configs on every successful reconnect.
 *          Replaces the previous unbounded `while (!connected) delay(2000)`
 *          loop which would trip the ESP32 task watchdog after ~5 s of broker
 *          unavailability.
 */
bool mqtt_try_connect() {
  if (mqtt.connected()) return true;
  Serial.print("MQTT connecting... ");
  bool ok = MQTT_USER
      ? mqtt.connect(DEVICE_ID, MQTT_USER, MQTT_PASS)
      : mqtt.connect(DEVICE_ID);
  if (ok) {
    Serial.println("OK");
    publish_discovery_all();
  } else {
    Serial.printf("failed rc=%d (will retry)\n", mqtt.state());
  }
  return ok;
}

void setup() {
  Serial.begin(115200);

  // 1) WiFi — bounded wait, restart on persistent failure (avoids WDT).
  WiFi.begin(WIFI_SSID, WIFI_PASS);
  uint32_t wifi_start = millis();
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    if (millis() - wifi_start > 30000) {
      Serial.println("WiFi timeout — restarting");
      ESP.restart();
    }
  }
  Serial.printf("WiFi up, IP=%s\n", WiFi.localIP().toString().c_str());

  // 2) MQTT.
  mqtt.setServer(MQTT_HOST, MQTT_PORT);
  mqtt.setKeepAlive(60);                        // 60 s keepalive (default 15 s)
  mqtt.setBufferSize(1024);                     // big enough for one discovery payload

  // 3) rbAmp.
  Wire.begin();
  Wire.setClock(50000);
  delay(300);
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);

  rb_write_u8(RB_ADDR, 0x01, 0x27);             // primer snapshot
  t_prev_ms = millis();

  // 4) First MQTT attempt — failure is non-fatal, loop() will retry.
  mqtt_try_connect();
}

void loop() {
  // Keep the broker session alive: service mqtt.loop() every iteration and
  // attempt reconnect with bounded back-off (no blocking 2s delay).
  if (!mqtt.connected()) {
    static uint32_t last_retry = 0;
    if (millis() - last_retry > 5000) {         // retry at most every 5 s
      last_retry = millis();
      mqtt_try_connect();
    }
  }
  mqtt.loop();

  static uint32_t last_period = 0;
  if (last_period == 0) last_period = millis(); // seed on first iteration
  if (millis() - last_period < 60000) {
    delay(50);                                  // short slice — keeps loop responsive
    return;
  }
  last_period = millis();

  // ----- Snapshot + read period snapshot -----
  rb_write_u8(RB_ADDR, 0x01, 0x27);
  uint32_t t_now = millis();
  delay(50);

  if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
    Serial.println("WARN: stale snapshot, skipping publish");
    t_prev_ms = millis();
    return;
  }
  float avg_p = rb_read_float_le(RB_ADDR, 0xDC);
  float dt_s  = (t_now - t_prev_ms) / 1000.0f;
  total_wh += (double)avg_p * dt_s / 3600.0;
  t_prev_ms = t_now;

  // ----- Read live RT values -----
  float u  = rb_read_float_le(RB_ADDR, 0x86);
  float i  = rb_read_float_le(RB_ADDR, 0x8E);
  float pf = rb_read_float_le(RB_ADDR, 0xB2);
  float q  = rb_read_float_le(RB_ADDR, 0xD0);
  uint8_t freq = rb_read_u8(RB_ADDR, 0x20);

  // ----- Compose the state JSON -----
  char payload[384];
  snprintf(payload, sizeof(payload),
    "{"
      "\"voltage\":%.1f,"
      "\"current\":%.3f,"
      "\"power\":%.1f,"
      "\"energy\":%.3f,"
      "\"frequency\":%u,"
      "\"power_factor\":%.3f,"
      "\"apparent_power\":%.1f,"
      "\"reactive_power\":%.1f"
    "}",
    u, i, avg_p, total_wh,
    (unsigned)freq, pf, u * i, q);

  // Topic shape matches the value_template of every discovery config.
  char topic[64];
  snprintf(topic, sizeof(topic), "rbamp/%s/state", DEVICE_ID);
  mqtt.publish(topic, payload, false);          // state is fresh each period, not retained

  Serial.printf("Published: %s\n", payload);
}

Résultat dans Home Assistant :

  • Dans les secondes qui suivent la première publication, HA crée automatiquement un appareil nommé Mains rbAmp avec 8 entités (tension, courant, puissance, énergie, fréquence, facteur de puissance, puissance apparente, puissance réactive) [Voltage, Current, Power, Energy, Frequency, Power Factor, Apparent Power, Reactive Power].
  • L'entité Energy a state_class: total_increasing et le bon device_class, de sorte que le tableau de bord Énergie de HA l'accepte comme source de consommation.
  • Pour retirer l'entité de HA, publiez une charge utile vide sur son topic homeassistant/sensor/.../config (retenu).

Extending:

  • Pour les UI2/UI3 multi-canaux, répétez le bloc de découverte avec des clés suffixées (current_1, power_1, energy_1, …) et ajoutez ces champs au JSON d'état.
  • Pour les modules STD bidirectionnels, ajoutez energy_exported avec device_class: energy et state_class: total_increasing.

Exemple 9 — Enregistreur distant sur batterie avec veille profonde

Objectif : un enregistreur d'énergie extérieur / autonome qui se réveille toutes les 10 minutes, capture une période, publie les données et retourne en veille profonde. Consommation moyenne de quelques mA, donc une seule cellule Li-ion tient plusieurs mois. Matériel : ESP32 (ou ESP32-S3) + un rbAmp UI1 + une petite batterie Li-ion + WiFi. Le rbAmp est également alimenté par un LDO à très faible courant de repos, de sorte que sa consommation d'environ 15 mA n'intervient que pendant l'éveil. Comptabilité : unidirectionnelle. L'énergie est conservée entre les cycles de veille profonde via la mémoire RTC à lente évolution.

C++
#include 
#include 
#include "esp_sleep.h"

#define RB_ADDR 0x50

const char* WIFI_SSID = "ssid";
const char* WIFI_PASS = "password";
const char* MQTT_HOST = "192.168.1.10";

// Wake every 10 minutes (600 s). The interval is the master_dt for Wh.
const uint64_t SLEEP_US = 10ULL * 60ULL * 1000000ULL;

// Power for rbAmp can be gated through a MOSFET driven by a GPIO,
// or simply left always-on if the LDO quiescent is acceptable.
const int PIN_RBAMP_POWER = 4;

// Values that must survive deep sleep are placed in RTC slow memory.
// IMPORTANT: ESP32 RTC slow memory is NOT zeroed on power-on after a brown-out
// or PSU dropout — it may hold garbage that looks like valid state. Gate every
// retained variable through a magic-marker check on cold boot.
RTC_DATA_ATTR uint32_t rtc_magic         = 0;   // 0xCAFEFEED when state initialised
RTC_DATA_ATTR double   rtc_total_wh      = 0;
RTC_DATA_ATTR uint32_t rtc_wake_count    = 0;
RTC_DATA_ATTR bool     rtc_primer_done   = false;
RTC_DATA_ATTR uint64_t rtc_t_prev_us     = 0;   // boot-time wall-clock anchor

#define RTC_MAGIC 0xCAFEFEEDu

WiFiClient   espClient;
PubSubClient mqtt(espClient);

/**
 * @brief  Power rbAmp on/off via a GPIO-driven high-side switch.
 * @param  on  true = enable, false = disable.
 * @details If your hardware always-powers rbAmp, you can remove this function
 *          and skip the calls to it.
 */
void rbamp_power(bool on) {
  pinMode(PIN_RBAMP_POWER, OUTPUT);
  digitalWrite(PIN_RBAMP_POWER, on ? HIGH : LOW);
  if (on) delay(300);                           // boot time
}

/**
 * @brief  Bring up WiFi with a hard timeout, so deep-sleep is never blocked
 *         forever on a missing AP.
 * @param  timeout_ms  Maximum time to wait for an association.
 * @return true on success, false on timeout.
 */
bool wifi_connect(uint32_t timeout_ms) {
  WiFi.mode(WIFI_STA);
  WiFi.begin(WIFI_SSID, WIFI_PASS);
  uint32_t t0 = millis();
  while (WiFi.status() != WL_CONNECTED) {
    if (millis() - t0 > timeout_ms) return false;
    delay(100);
  }
  return true;
}

/**
 * @brief  Publish one measurement to MQTT.
 * @param  avg_p   Time-averaged power over the last interval, W.
 * @param  total_e Accumulated energy total, Wh.
 * @param  dt_s    Length of the elapsed interval, seconds.
 */
void publish_measurement(float avg_p, double total_e, float dt_s) {
  char payload[256];
  snprintf(payload, sizeof(payload),
    "{\"wake\":%lu,\"dt_s\":%.1f,\"avg_p\":%.1f,\"energy_wh\":%.3f}",
    (unsigned long)rtc_wake_count, dt_s, avg_p, total_e);
  mqtt.publish("rbamp/remote/state", payload, true);
  mqtt.loop();
  Serial.printf("Published: %s\n", payload);
}

void setup() {
  Serial.begin(115200);

  // --- Cold-boot detection ---
  // On any non-deep-sleep reset (power-on, brown-out, watchdog, ESP.restart),
  // RTC slow memory may contain garbage. Initialise on first boot.
  if (rtc_magic != RTC_MAGIC) {
    Serial.println("Cold boot — initialising RTC state");
    rtc_total_wh    = 0.0;
    rtc_wake_count  = 0;
    rtc_primer_done = false;
    rtc_t_prev_us   = 0;
    rtc_magic       = RTC_MAGIC;
  }
  rtc_wake_count++;

  // --- Power up rbAmp and bring up I2C ---
  rbamp_power(true);
  Wire.begin();
  Wire.setClock(50000);
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);

  // First wake-up after a cold boot: do a primer snapshot (its result is discarded).
  if (!rtc_primer_done) {
    rb_write_u8(RB_ADDR, 0x01, 0x27);
    rtc_t_prev_us = esp_timer_get_time();
    rtc_primer_done = true;

    // Go straight back to sleep — we need at least one full period to elapse
    // before the next snapshot can produce a meaningful sample.
    Serial.println("Primer done — sleeping until first real period");
    rbamp_power(false);
    esp_sleep_enable_timer_wakeup(SLEEP_US);
    esp_deep_sleep_start();
  }

  // --- Subsequent wake-ups: read the period that just ended ---
  rb_write_u8(RB_ADDR, 0x01, 0x27);             // close current period
  uint64_t t_now_us = esp_timer_get_time();
  delay(50);

  if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
    Serial.println("WARN: stale snapshot — skipping this cycle");
    rtc_t_prev_us = t_now_us;
    rbamp_power(false);
    esp_sleep_enable_timer_wakeup(SLEEP_US);
    esp_deep_sleep_start();
  }

  float avg_p = rb_read_float_le(RB_ADDR, 0xDC);
  // dt is wall-clock between snapshots; we measure it on the ESP32's RTC.
  // SLEEP_US is the intent; esp_timer accounts for actual sleep + on-time.
  float dt_s = (float)(t_now_us - rtc_t_prev_us) / 1000000.0f;
  rtc_t_prev_us = t_now_us;

  // Accumulate energy in RTC memory so it survives sleep.
  rtc_total_wh += (double)avg_p * dt_s / 3600.0;

  // --- Publish via WiFi/MQTT ---
  if (wifi_connect(8000)) {
    mqtt.setServer(MQTT_HOST, 1883);
    mqtt.setBufferSize(512);
    if (mqtt.connect("rbamp-remote")) {
      publish_measurement(avg_p, rtc_total_wh, dt_s);
      mqtt.disconnect();
    }
    WiFi.disconnect(true);
    WiFi.mode(WIFI_OFF);
  } else {
    Serial.println("WiFi failed — value buffered in RTC memory, will retry next wake");
  }

  // --- Sleep ---
  rbamp_power(false);                           // power-gate rbAmp
  esp_sleep_enable_timer_wakeup(SLEEP_US);
  Serial.println("Deep sleep");
  esp_deep_sleep_start();
}

void loop() {
  // setup() always ends in esp_deep_sleep_start() — loop is never reached.
}

Budget énergétique (typique, ESP32-WROOM) :

  • Durée d'éveil par réveil : environ 3 s (Wi-Fi + MQTT + I²C).
  • Courant au réveil : environ 80 mA en moyenne → environ 0.07 mAh par réveil.
  • Courant en veille : environ 10 µA (RTC + domaines conservés).
  • Un réveil toutes les 10 min → environ 10 mAh/jour au total → une seule cellule Li-ion de 2000 mAh tient environ 6 mois.

Notes:

  • rtc_total_wh survit à la veille profonde grâce à RTC_DATA_ATTR. Il est perdu en cas de coupure complète (batterie retirée). Pour une persistance absolue, enregistrez périodiquement la valeur sur MQTT ou dans la NVS.
  • L'étape de capture d'amorçage est conditionnée par rtc_primer_done, donc le premier échantillon après un démarrage à froid est correctement écarté.
  • wifi_connect() a un délai d'expiration strict. Si le WiFi est indisponible, l'esquisse retourne en veille — le total d'énergie continue de s'accumuler en interne et est publié à la prochaine connexion réussie.

Exemple 10 — Tarif heures pleines / heures creuses (TOU) avec horloge murale NTP

Objectif : facturer l'énergie selon une grille tarifaire horaire (tarifs différents aux heures pleines et aux heures creuses). L'ESP32 maintient une horloge murale réelle via NTP, répartit chaque période close dans le bon compartiment tarifaire, remet à zéro les totaux journaliers à minuit et publie des charges utiles MQTT avec horodatages ISO. Matériel : ESP32 + un rbAmp UI1 + WiFi. Comptabilité : unidirectionnelle. La même logique de compartiments fonctionne pour les lignes STD — il suffit de faire passer à la fois les accumulateurs de consommation et d'export.

C++
#include 
#include 
#include 

#define RB_ADDR 0x50
const char* WIFI_SSID = "ssid";
const char* WIFI_PASS = "password";
const char* MQTT_HOST = "192.168.1.10";

// NTP. Use a regional pool, then fall back to a global pool.
const char* NTP_PRIMARY   = "pool.ntp.org";
const char* NTP_SECONDARY = "time.google.com";

// Local timezone in POSIX TZ format. Example: Central Europe (Berlin / Warsaw).
//   CET = standard offset +1, CEST = daylight offset +2,
//   M3.5.0/2 = last Sunday of March 02:00 → DST starts,
//   M10.5.0/3 = last Sunday of October 03:00 → DST ends.
const char* TZ_INFO = "CET-1CEST,M3.5.0/2,M10.5.0/3";

// Time-of-use schedule: peak hours [PEAK_START_HOUR .. PEAK_END_HOUR), local time.
const int PEAK_START_HOUR = 8;   // inclusive
const int PEAK_END_HOUR   = 22;  // exclusive

WiFiClient   espClient;
PubSubClient mqtt(espClient);

uint32_t t_prev_ms = 0;

/** @brief  Energy totals for the current day, split by tariff. */
struct DayTotals {
  double peak_wh     = 0;   // Wh consumed during peak hours
  double off_peak_wh = 0;   // Wh consumed during off-peak hours
  int    day_of_year = -1;  // tm_yday of the day these totals belong to
};
DayTotals today;

/** @brief  Lifetime totals, never reset by the daily roll-over. */
struct LifetimeTotals {
  double peak_wh     = 0;
  double off_peak_wh = 0;
};
LifetimeTotals lifetime;

/**
 * @brief  Connect to WiFi (blocking with progress dots on Serial).
 */
void wifi_connect() {
  WiFi.mode(WIFI_STA);
  WiFi.begin(WIFI_SSID, WIFI_PASS);
  Serial.print("WiFi");
  while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print('.'); }
  Serial.printf(" up, IP=%s\n", WiFi.localIP().toString().c_str());
}

/**
 * @brief  Synchronise the system clock with NTP and apply the local timezone.
 * @details Blocks until the first valid time is received (timeout 15 s).
 *          On timeout the function returns anyway; subsequent reads will see
 *          tm_year == (1970-1900) and the caller can detect this.
 */
void ntp_sync() {
  configTime(0, 0, NTP_PRIMARY, NTP_SECONDARY);   // raw UTC first
  setenv("TZ", TZ_INFO, 1);                       // then apply local TZ
  tzset();

  Serial.print("NTP sync");
  time_t now = 0;
  uint32_t t0 = millis();
  while (now < 1700000000 && millis() - t0 < 15000) {  // sanity: ≥ year 2023
    delay(500);
    Serial.print('.');
    time(&now);
  }
  struct tm tm_now;
  localtime_r(&now, &tm_now);
  Serial.printf(" %04d-%02d-%02d %02d:%02d:%02d %s\n",
                tm_now.tm_year + 1900, tm_now.tm_mon + 1, tm_now.tm_mday,
                tm_now.tm_hour, tm_now.tm_min, tm_now.tm_sec, tm_now.tm_zone);
}

/**
 * @brief  Decide whether a given local hour falls inside the peak tariff window.
 * @param  hour  Hour of day, 0..23 (local time).
 * @return true if peak, false if off-peak.
 * @details For schedules that span midnight (e.g. peak is 22..6),
 *          swap the test to `(hour >= PEAK_START_HOUR || hour < PEAK_END_HOUR)`.
 */
bool is_peak_hour(int hour) {
  return (hour >= PEAK_START_HOUR && hour < PEAK_END_HOUR);
}

/**
 * @brief  Format the current local time as ISO 8601 (with offset).
 * @param  out      Destination buffer.
 * @param  out_len  Buffer size.
 */
void format_iso_now(char* out, size_t out_len) {
  time_t now;
  time(&now);
  struct tm tm_now;
  localtime_r(&now, &tm_now);
  strftime(out, out_len, "%Y-%m-%dT%H:%M:%S%z", &tm_now);  // e.g. 2026-05-22T18:30:00+0200
}

/**
 * @brief  Add the snapshot energy of one period to the right tariff bucket,
 *         and roll the daily totals over at midnight.
 * @param  e_wh    Energy accumulated during the period, Wh.
 * @param  tm_now  Local time at the moment of the snapshot (NOT at period start).
 */
void accumulate_energy(double e_wh, const struct tm& tm_now) {
  // Daily roll-over: when the day changes, publish yesterday's totals
  // (if any) and reset.
  if (today.day_of_year != tm_now.tm_yday) {
    if (today.day_of_year >= 0) {
      char payload[192];
      snprintf(payload, sizeof(payload),
        "{\"yday\":%d,\"peak_wh\":%.3f,\"off_peak_wh\":%.3f,\"total_wh\":%.3f}",
        today.day_of_year,
        today.peak_wh, today.off_peak_wh,
        today.peak_wh + today.off_peak_wh);
      mqtt.publish("rbamp/tou/day_close", payload, true);
      Serial.printf("Day closed: %s\n", payload);
    }
    today = {};                                  // reset
    today.day_of_year = tm_now.tm_yday;
  }

  // Add to the right bucket. The choice is made on the snapshot instant —
  // accurate enough at 60 s periods (boundary error < 60 s/day).
  if (is_peak_hour(tm_now.tm_hour)) {
    today.peak_wh    += e_wh;
    lifetime.peak_wh += e_wh;
  } else {
    today.off_peak_wh    += e_wh;
    lifetime.off_peak_wh += e_wh;
  }
}

/**
 * @brief  Publish one tariff-tagged state to MQTT.
 * @param  iso     ISO 8601 timestamp of the measurement.
 * @param  avg_p   Time-averaged power over the just-closed period, W.
 * @param  e_wh    Energy added to the totals in this period, Wh.
 * @param  peak    true if the current hour is a peak hour.
 */
void publish_state(const char* iso, float avg_p, double e_wh, bool peak) {
  char payload[384];
  snprintf(payload, sizeof(payload),
    "{"
      "\"ts\":\"%s\","
      "\"tariff\":\"%s\","
      "\"avg_p\":%.1f,"
      "\"period_wh\":%.4f,"
      "\"today_peak_wh\":%.3f,"
      "\"today_off_peak_wh\":%.3f,"
      "\"life_peak_wh\":%.3f,"
      "\"life_off_peak_wh\":%.3f"
    "}",
    iso, peak ? "peak" : "off_peak",
    avg_p, e_wh,
    today.peak_wh, today.off_peak_wh,
    lifetime.peak_wh, lifetime.off_peak_wh);
  mqtt.publish("rbamp/tou/state", payload, false);
  Serial.printf("%s\n", payload);
}

void setup() {
  Serial.begin(115200);

  // 1) WiFi and NTP — get the wall clock first.
  wifi_connect();
  ntp_sync();

  // 2) MQTT.
  mqtt.setServer(MQTT_HOST, 1883);
  mqtt.setKeepAlive(60);                         // 60 s keepalive (default 15 s)
  mqtt.setBufferSize(512);
  mqtt.connect("rbamp-tou");                     // best-effort; loop() retries

  // 3) rbAmp.
  Wire.begin();
  Wire.setClock(50000);
  delay(300);
  while ((rb_read_u8(RB_ADDR, 0xCE) & 0x01) == 0) delay(50);

  rb_write_u8(RB_ADDR, 0x01, 0x27);              // primer snapshot
  t_prev_ms = millis();

  Serial.printf("TOU started: peak %02d:00..%02d:00 local\n",
                PEAK_START_HOUR, PEAK_END_HOUR);
}

void loop() {
  // Maintain MQTT session: reconnect with bounded back-off (no blocking).
  if (!mqtt.connected()) {
    static uint32_t last_retry = 0;
    if (millis() - last_retry > 5000) {
      last_retry = millis();
      mqtt.connect("rbamp-tou");
    }
  }
  mqtt.loop();

  static uint32_t last_period = 0;
  if (last_period == 0) last_period = millis();  // seed on first iteration
  if (millis() - last_period < 60000) {
    delay(50);                                   // short slice — keeps mqtt.loop responsive
    return;
  }
  last_period = millis();

  // ----- Snapshot + period read -----
  rb_write_u8(RB_ADDR, 0x01, 0x27);
  uint32_t t_now_ms = millis();
  delay(50);

  if ((rb_read_u8(RB_ADDR, 0x07) & 0x01) == 0) {
    Serial.println("WARN: stale snapshot, skipping");
    t_prev_ms = millis();
    return;
  }
  float avg_p = rb_read_float_le(RB_ADDR, 0xDC);
  float dt_s  = (t_now_ms - t_prev_ms) / 1000.0f;
  double e_wh = (double)avg_p * dt_s / 3600.0;
  t_prev_ms = t_now_ms;

  // ----- Tag with current local time, choose tariff bucket -----
  time_t now_s;
  time(&now_s);
  struct tm tm_now;
  localtime_r(&now_s, &tm_now);

  // Guard against a fresh boot with no NTP yet (year << 2023).
  if (tm_now.tm_year + 1900 < 2023) {
    Serial.println("WARN: clock not yet synced, retrying NTP");
    ntp_sync();
    return;
  }

  accumulate_energy(e_wh, tm_now);

  char iso[40];
  format_iso_now(iso, sizeof(iso));
  publish_state(iso, avg_p, e_wh, is_peak_hour(tm_now.tm_hour));
}

Notes:

  • La puce ne voit jamais l'horloge murale. Le maître attache l'horodatage au moment de la capture — c'est le bon moment, car c'est là que la fenêtre de mesure s'est refermée.
  • localtime_r() applique automatiquement la règle POSIX TZ, donc les changements d'heure d'été sont gérés correctement sans code supplémentaire.
  • Erreur de frontière : une période de 60 s qui franchit la frontière de 22:00 est entièrement attribuée aux heures creuses (l'horodatage est à l'instant de la capture, après 22:00). Pour les périodes de 60 secondes, cela représente au plus environ 30 s de mauvaise attribution par jour — négligeable pour la facturation résidentielle. Pour les périodes de 15 minutes, préférez aligner la capture sur la frontière du planning, ou répartir la période entre les deux compartiments.
  • Pour la mesure bidirectionnelle STD, lancez un second appel accumulate_energy() côté export et publiez à la fois la consommation pleines/creuses et l'export pleines/creuses.
  • Le changement de jour publie à minuit une charge utile retenue sur rbamp/tou/day_close ; Home Assistant ou une source de données Grafana peut s'y abonner pour enregistrer les totaux journaliers.

Exemple de charge utile d'état MQTT :

JSON
{
  "ts": "2026-05-22T18:30:00+0200",
  "tariff": "peak",
  "avg_p": 850.5,
  "period_wh": 14.175,
  "today_peak_wh": 4253.7,
  "today_off_peak_wh": 1820.4,
  "life_peak_wh": 285431.2,
  "life_off_peak_wh": 178654.9
}

Exemple de charge utile de bascule quotidienne (rbamp/tou/day_close) :

JSON
{"yday":141,"peak_wh":4253.7,"off_peak_wh":1820.4,"total_wh":6074.1}

Comparaison des exemples

# Complexité Affichage MQTT DRDY Multi-modules Bidirectionnel Persistance Cas d'usage
1 minimal Série — — — — — test de fumée
2 faible OLED — — — — RAM compteur encapsulé
3 faible Série — — oui (3) — — surveillance domestique
4 moyen — oui — — — RAM par appareil dans HA
5 moyen Série — oui — oui (côté maître) RAM maison solaire en gamme BASIC
6 élevé — oui — oui (3) oui RAM bilan complet du foyer
7 moyen Série + SD — oui — — Carte SD détection d'événements
8 moyen — oui (+disco) — — facultatif RAM + MQTT Intégration à la découverte automatique HA
9 moyen — oui — — — Mémoire RTC enregistreur hors réseau / extérieur
10 moyen Série oui — — facultatif RAM + MQTT (clôture de journée) Comptage pointe / heures creuses avec horloge NTP

Bonnes pratiques

  • Vérifiez toujours DATA_VALID après le démarrage et PERIOD_VALID après CMD_LATCH_PERIOD.
  • Utilisez delay(50) après un instantané avant de lire cet instantané.
  • L'horloge maître fait foi pour les Wh — n'utilisez pas PERIOD_LATCH_MS de la puce.
  • DRDY aide aux cadences d'interrogation élevées (≥ 5 Hz) ; l'interrogation ordinaire convient aux faibles cadences (≤ 1 Hz).
  • Pour les configurations multi-modules, une capture diffusée via appel général assure une synchronisation précise (firmware 1.0+).
  • La persistance côté maître est obligatoire pour une comptabilité à long terme — rbAmp ne stocke pas les Wh, seulement le avg_P courant.
  • Lors du remplacement d'un rbAmp dans un système en fonctionnement, sauvegardez le total_wh cumulé côté maître avant le remplacement et restaurez-le ensuite — le nouveau module repart de zéro pour ses compteurs.

Et ensuite

Une fois à l'aise avec ces dix exemples, écrivez le code d'intégration pour votre plateforme cible. Bibliothèques prêtes à l'emploi :

  • Arduino → classe RbAmp (voir le tableau des bibliothèques clientes du README)
  • ESPHome → composant externe (étude complète sur tools/esphome-rbamp/docs/en/)
  • MicroPython → paquet rbamp (voir le tableau des bibliothèques clientes du README)
  • ESP-IDF → composant rbamp (voir le tableau des bibliothèques clientes du README)
  • SBC Linux (CPython) → paquet rbamp (voir le tableau des bibliothèques clientes du README)
  • Tasmota → pilote Berry — reporté (aucune bibliothèque livrée)

Si votre plateforme n'est pas couverte, les exemples Arduino servent de référence : adaptez les helpers rb_read_* à l'API I²C de votre plateforme, la logique reste la même.