rbAmp
EN
Shop

Comparison · · 3 min read

rbAmp vs Shelly EM — Modular DIY Metering vs Turnkey Certified

An honest comparison: rbAmp is a modular DIY metering front-end, Shelly EM is a turnkey certified device. Cost per channel, accuracy, certification and when each one wins.

These two are not the same kind of product, and the honest comparison starts there. Shelly EM is a finished, certified device you wire in and it works. rbAmp is a metering front-end module — you add current transformers and an ESP32 host and build exactly the meter you want. So this isn't "which is cheaper" — it's modular-DIY-and-precise vs turnkey-and-certified.

Read this first — what you're actually comparing A Shelly EM price is a turnkey price: the enclosure, the firmware, the cloud, and (on the EM Gen3) a CT in the box. An rbAmp price is a module price: you still add a CT (~$9/channel) and an ESP32 host. Below we compare all-in DIY cost against Shelly's turnkey cost — not the bare module price against a finished device.

The numbers

rbAmp UI7 (module) Shelly EM Gen3 50A Shelly Pro 3EM
Price $18.99 $69.99 $154.99
Channels 7 2 (1 CT incl.) 3
In the box module only turnkey + 1 CT turnkey + 3 CT, DIN
$/channel (module only) $2.71 — —
$/channel (all-in) ~$13 DIY (+ CT + host) ~$35 ~$52
Accuracy Class ≤ 0.5 % in the working range (5–100 % of the SCT-013 rating) for most ratings, plus the sensor's own tolerance — per rating in the SCT-013 accuracy table 1 % Class B 1 % Class B, IEC-certified
Host / integration your ESP32 — ESPHome/Arduino/Pi, local built-in, Shelly Cloud + local built-in, Cloud + local

Specs & prices checked: Aug 2026 — rbAmp: rbamp.com · Shelly EM Gen3: us.shelly.com/products/shelly-em-gen3-50a · Shelly Pro 3EM: us.shelly.com/products/shelly-pro-3em-us-list.

Where rbAmp is the better fit

  • Cost per measured circuit. Even counting the CT and the ESP32 host, an all-in rbAmp channel lands around $13 against $35–52 for Shelly. If you are metering many circuits, the gap compounds — one ESP32 can host a multi-module rbAmp bus, so the host cost amortises.
  • Accuracy, published per clamp rating. With a standard SCT-013, the module holds a class of ≤ 0.5 % in the working range (5–100 % of the rating) for most ratings, and the clamp adds its own tolerance on top — both per rating in the SCT-013 accuracy table. Shelly states 1 % Class B. (Figures are for resistive loads; we don't publish a low-power-factor number we haven't bench-verified.)
  • Modularity & ownership. Pick 1–7 channels per module, put several modules on one I²C bus, read them from ESPHome, Arduino, a Raspberry Pi or ESP-IDF — no cloud, no subscription, no vendor lock. See the UI-series card.

Where Shelly is the better fit

  • Certification. The Pro 3EM is IEC-certified Class B — if you need metering for billing, sub-tenant invoicing or an insurer, a certified device is the right tool; rbAmp is not certified.
  • Turnkey. Unbox, wire, done — no firmware to flash, no host to choose, a CT already in the box on the EM Gen3. If you value time-to-running over cost-per-channel, Shelly wins.
  • Polish & brand. Mature app, Shelly Cloud, a large ecosystem and support org.

The honest boundary

rbAmp does not yet ship an integrated multi-channel device — a multi-circuit rbAmp meter is a DIY build (module + CTs + ESP32) today. Integrated, ready-to-run units are in development. So if you want something that looks and installs like a Shelly, that rbAmp product isn't here yet; what is here is the module series that lets you build a cheaper, more precise meter yourself.

So, which one?

  • Billing / certified / plug-and-play, a circuit or two: Shelly EM Gen3 or Pro 3EM.
  • Many circuits, tightest accuracy, local-only, willing to build: an rbAmp UI-series bus.

New to CT metering? Start with How CT Energy Measurement Really Works. Coming from a Shelly or PZEM setup? See Migrating to rbAmp and keeping your Home Assistant history, or build one with the Home Assistant Energy Dashboard guide.

Read next