Zum Inhalt springen

Tools for rbAmp builders

Configure, calibrate, generate code. No registration. Free forever. Built from production experience — we use these tools internally for QA on every shipped module. Now public.

[BREADCRUMBS: Home / Tools]

Tool cards

[4-card grid: 4 cols desktop / 2 cols tablet / 1 col mobile. Each card ~ 280 × 280 px with icon + title + 2-line description + CTA.]

🔧 Online Configurator

Tell us your setup, we generate ESPHome YAML or Arduino sketch instantly.

Pick your module, your host MCU, your tariff zones, and the integration target (HA / RBgrid / Cloud / custom). We output ready-to-flash code with sensible defaults.

[CTA: Open Configurator → /tools/configurator] (Coming Soon — M+3)

🎯 Calibration Wizard

Two-point calibration with step-by-step guidance. Required for ±0.5% accuracy on Standard / PRO modules.

Wire your module against a reference load (incandescent bulb works fine), follow the prompts. Wizard writes gain coefficients to flash via I²C.

[CTA: Open Wizard → /tools/calibration] (Coming Soon — M+3)

📦 Project Templates

Pre-configured ESPHome / Arduino projects for common use cases.

Solar router, 3-phase apartment, EV charger tariff, sub-metering rental, NILM raw-data export — drop the YAML / .ino into your project, replace the WiFi credentials, flash.

[CTA: Browse Templates → /tools/templates] (Coming Soon — M+3)

All proven wiring diagrams in scalable SVG.

ESP32, Arduino UNO, Raspberry Pi, STM32, AVR. Single-module / multi-module / 3-phase Kit topologies. Pull-up cuts, NRST hazard avoidance. Copy the SVG into your own docs.

[CTA: Browse Schematics → /tools/schematics] (Coming Soon — M+3)

🔌 Firmware Flash Tool

[Coming Soon badge — ships with Wireless line]

Web-based firmware flasher for Wireless modules. Switch between rbAmp Cloud / ESPHome / RBgrid / custom in 30 seconds. Web Serial API, no driver install.

[CTA: Open Flash Tool → /tools/flash] (Coming Soon — Q3 2026 with Wireless launch)

Why these tools

Built from production experience. We use these internally for testing and quality control of every shipped module — calibration is mandatory before any unit leaves the factory; templates and schematics drive our reference test rigs.

Publishing them as web tools lowers the friction for the first project. The 80% case (typical UI3 + ESPHome + tariff zones + HA) goes from "research 4 docs and write 200 lines of YAML" to "answer 6 dropdowns, copy YAML, flash."

Have a tool idea?

Suggest a tool you'd find useful — we listen. The Configurator and Calibration Wizard both started as community asks.

[CTA: Suggest a tool → /contact-us] (navy outline — topic: Tool suggestion)

Related

  • Documentation — protocol and code if you skip the Configurator
  • Solutions — by use case, with example configs the Configurator can generate
  • Products — choose your module before configuring
  • Customer Support — if a tool misbehaves, file it here