Energy is integrated over exact wall-clock intervals: the module latches a measurement window atomically and the host integrates true active power over the elapsed time, so there's no on-device counter to quantize or drift. In the ESPHome component, the accumulated energy is persisted to the ESP32's NVS, so an energy total survives a reboot or brownout without a gap or reset in Home Assistant. In a bare-Arduino sketch, the host owns the running total — persist it yourself (e.g. to an SD card) if you need it across power cycles.
FAQ · · 1 min read
How does rbAmp handle energy (Wh), and does it survive a reboot?
Energy is integrated over exact wall-clock intervals with no on-device drift; ESPHome persists the total to NVS so it survives a reboot without a gap.